IDECO T-500 Mud Pump Parts and Spares — Easy Wearing Parts

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
API 7K IDECO T-500 mud pump parts and spares. Easy wearing parts include liners 4 inch to 7 inch, pistons, piston rubbers, valve assemblies, valve seats, valve springs, fluid end modules, seals, and piston rods. 7 x 8 inch, 500 HP, max pressure 1591 PSI (110 bar), max flow 493 GPM (2240 LPM). OEM part numbers available. Contact info@hyrig.com.

Conatct For Details
DetailReview(0)Additional

The IDECO T-500 is a 500 HP triplex single-acting piston pump with a 7 inch x 8 inch (177.8 mm x 203.2 mm) bore and stroke configuration. The pump delivers a maximum pressure of 1591 PSI (110 bar) and a maximum flow rate of 493 GPM (2240 LPM). The T-500 features a crosshead made of high-strength ductile iron or cast steel, with replaceable manganese bronze guides to create a low-friction, high-wear-resistant slide that ensures the absolute linearity of the piston rod motion, damage to the seals at the hydraulic end due to eccentric loading is avoided. The pump is widely used in oil and gas drilling, water well drilling, and geological exploration. Our IDECO T-500 mud pump parts and spares are manufactured to API 7K standards and are designed as direct replacements for OEM components.

Easy Wearing Parts for IDECO T-500 with OEM Part Numbers:

Liners and Liner Packing:

Liner 4 inch — Part No. LA-0234-40

Liner 4.5 inch — Part No. LA-0234-44

Liner 5 inch — Part No. LA-0234-50

Liner 5.5 inch — Part No. LA-0234-54

Liner 6 inch — Part No. LA-0234-60

Liner 6.25 inch — Part No. LA-0234-62

Liner 6.5 inch — Part No. LA-0234-64

Liner 6.75 inch — Part No. LA-0234-66

Liner 7 inch — Part No. LA-0234-70

Liner Packing — Part No. LAG-0783

Gaskets:

Valve Cover Gasket — Part No. LAG-0783

Cylinder Head Gasket — Part No. LAG-0783

Valve Assembly and Components:

Valve (Urethane Insert) — Part No. LA-U5B-EH (4 Web), LA-6FO-V1 (Full Open), LA-1560995 (G2), LA-RN6-V1 (Roughneck)

Valve (Rubber Insert) — Part No. LA-5B-EH (4 Web)

Valve Seat — Part No. LA-6ADD-B6 (4 Web), LA-6FO-S1 (Full Open), LA-1561380 (G2), LA-RN6-S6 (Roughneck)

Valve Spring — Part No. LA-5710-115 (4 Web), LA-5710-115L (Full Open/Roughneck), LA-1560701 (G2)

Valve Insert (Red Thunder) — Part No. LA-UDD-6ABHT

Valve Insert (Urethane) — Part No. LA-UDD-6AB, LA-6FO-SI, LA-1560587, LA-RN6-I

Valve Insert (Rubber) — Part No. LA-DD-6AB

Valve Seat Puller Head — Part No. LA-1700-6, LA-1700-6FO, LA-1700-6G2

Pistons:

Bonded Piston (Red Thunder) 4 inch — Part No. LA-RT-400

Bonded Piston (Red Thunder) 4.5 inch — Part No. LA-RT-440

Bonded Piston (Red Thunder) 5 inch — Part No. LA-RT-500

Bonded Piston (Red Thunder) 5.5 inch — Part No. LA-RT-540

Bonded Piston (Red Thunder) 6 inch — Part No. LA-RT-600

Bonded Piston (Red Thunder) 6.5 inch — Part No. LA-RT-640

Bonded Piston (Red Thunder) 7 inch — Part No. LA-RT-700

Imperial Piston 4 inch — Part No. LA-I40HK14/15

Imperial Piston 4.5 inch — Part No. LA-I44HK14/15

Imperial Piston 5 inch — Part No. LA-I50HB14/15

Imperial Piston 5.5 inch — Part No. LA-I54HB14/15

Imperial Piston 6 inch — Part No. LA-I60HB14/15

Imperial Piston 6.5 inch — Part No. LA-I64HL14/15

Imperial Piston 7 inch — Part No. LA-I70HL14/15

Imperial Rubber Kit 4 inch — Part No. LA-I40HK

Imperial Rubber Kit 4.5 inch — Part No. LA-I44HK

Imperial Rubber Kit 5 inch — Part No. LA-I50HB

Imperial Rubber Kit 5.5 inch — Part No. LA-I54HB

Imperial Rubber Kit 6 inch — Part No. LA-I60HB

Imperial Rubber Kit 6.5 inch — Part No. LA-I64HL

Imperial Rubber Kit 7 inch — Part No. LA-I70HL

Rubber Bonded Piston 4 inch — Part No. LA-RB-400

Rubber Bonded Piston 4.5 inch — Part No. LA-RB-440

Rubber Bonded Piston 5 inch — Part No. LA-RB-500

Rubber Bonded Piston 5.5 inch — Part No. LA-RB-540

Rubber Bonded Piston 6 inch — Part No. LA-RB-600

Rubber Bonded Piston 6.5 inch — Part No. LA-RB-640

Rubber Bonded Piston 7 inch — Part No. LA-RB-700

Long Life (Urethane) Piston 4 inch — Part No. LA-LL-400

Long Life (Urethane) Piston 4.5 inch — Part No. LA-LL-440

Long Life (Urethane) Piston 5 inch — Part No. LA-LL-500

Long Life (Urethane) Piston 5.5 inch — Part No. LA-LL-540

Long Life (Urethane) Piston 6 inch — Part No. LA-LL-600

Long Life (Urethane) Piston 6.5 inch — Part No. LA-LL-640

Long Life (Urethane) Piston 7 inch — Part No. LA-LL-700

Rods and Related:

Piston Rod — Part No. LA-0237

Fluid End Modules and Accessories:

Fluid Module, Studded — Part No. MK-551-458 (Qty 3)

Stud, Frame — Part No. MK-551-410-01 (Qty 24)

Stud, Discharge Manifold — Part No. MK-551-410-02 (Qty 12)

Stud, Threaded Ring — Part No. MK-551-410-03 (Qty 48)

Nut — Part No. MK-IN-416 (Qty 84)

Threaded Plug Retainer — Part No. MK-551-405-04 (Qty 6)

Threaded Ring — Part No. MK-551-405-03 (Qty 9)

Cylinder Head Plug — Part No. MK-551-422-02 (Qty 3)

Cylinder Head Plug Top — Part No. MK-551-422-03 (Qty 3)

Threaded Liner Retainer — Part No. MK-551-405-05 (Qty 3)

Lower Valve Guide — Part No. MK-551-405-07 (Qty 3)

Retainer, Lower Valve Guide — Part No. MK-551-422-04 (Qty 3)

Seal, Cylinder Head Plug and Liner — Part No. MK-BMT-1669-63-09 (Qty 9)

Seal, Discharge Manifold — Part No. MK-IO-548 (Qty 3)

Seal, Suction Manifold — Part No. MK-IO-521 (Qty 3)

Valve Guide Bushing — Part No. MK-551-405-09 (Qty 6)

Upper Valve Guide — Part No. MK-551-405-06 (Qty 3)

Materials and Construction:

Each IDECO T-500 part is made from materials selected for demanding oilfield service. Fluid end modules use high-strength alloy forged steel. Liners use forged steel outer sleeves and high-chromium cast iron inner sleeves, or ceramic for extended life. Pistons use high-strength steel cores with urethane, rubber, or replaceable cup designs. Valve bodies and seats use forged alloy steel with advanced heat treatment. Crosshead guides use replaceable manganese bronze for low-friction and high-wear resistance. Seals use NBR or HNBR rubber. All parts are precision machined to ensure proper fit and reliable performance.

Key Performance Advantages:

Our IDECO T-500 mud pump parts and spares offer high wear resistance, reliable sealing, and long service life. The T-500 features a robust crosshead design with replaceable manganese bronze guides ensuring absolute linearity of piston rod motion. Parts are compatible with water-based, oil-based, and synthetic drilling fluids.

Applications:

These parts are suitable for oil and gas drilling, water well drilling, geological exploration, and grouting operations.

Compatibility:

All listed parts are direct replacements for IDECO T-500 mud pump components. The T-500 shares numerous fluid end components with the T-800 and T-1000 models. No modification is required for installation.

Order Information:

MOQ: 5 pieces or sets, depending on the part. Custom materials, colors, and branding available. Standard export packaging. Delivery from stock or short lead time. For pricing, technical data sheets, or OEM inquiries, please contact us at info@hyrig.com.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit