Introduction: KHT9625 CASING TONG Reshapes Drilling Operation Standards
In oil and gas drilling engineering, casing tongs serve as the core equipment for casing running operations, directly determining thread connection quality, operational efficiency, and construction safety. As a hydraulic casing tong specifically designed for harsh working conditions, the KHT9625 CASING TONG integrates advanced hydraulic mechanics and mechanical transmission technology. With its wide adaptability range, precise torque control, and reliable performance, it has become the preferred equipment for onshore and offshore drilling projects. Whether for conventional oil and gas development or complex geological drilling, the KHT9625 CASING TONG delivers efficient operational performance to reduce labor intensity, ensure the tightness and structural strength of casing string connections, and provide core support for the smooth progress of drilling projects.
Core Advantages: Performance Breakthroughs of KHT9625 CASING TONG
1. Wide Adaptability, Covering Diverse Operational Needs
The KHT9625 CASING TONG adopts a split design of master tong and backup tong. The master tong has an adaptability range of 2 7/8″--9 5/8″, while the backup tong is compatible with casing sizes from 2 7/8″ to 10 1/2″. Equipped with 10 optional jaw specifications (2.88″ to 10.5″), it can meet the make-up and break-out requirements of different diameter casings without frequent equipment replacement, significantly improving construction flexibility. The 10″ (255mm) jaw opening design, combined with the reliable clamping force of high-strength alloy jaws, ensures no slipping or casing surface damage during high-torque operations, guaranteeing connection accuracy.
2. Multi-Speed Regulation & Super Torque, Balancing Efficiency and Strength
The equipment is equipped with a 4-speed transmission system, with a speed range from 6.5 RPM to 65 RPM (@40GPM / 150 LPM), which can be flexibly switched according to operational stages: high gear for rapid make-up and low gear for final tightening with ultra-high torque. Under a working pressure of 2000PSI (14MPa) , its maximum output torque reaches 25000 ft.lb (34000 N·m) , easily handling high-load requirements in complex working conditions such as deep wells and ultra-deep wells, far exceeding the performance limits of conventional casing tongs. Precise torque control not only ensures the tightness of thread connections but also complies with API 7K and SY/T 5074 industry standards, effectively avoiding safety hazards caused by over-tightening or under-tightening.
3. Compact Design & Stable Structure, Adapting to Harsh Working Conditions
The overall dimensions of the KHT9625 CASING TONG are 59″×31″×69″ (1500×790×1750 mm) , with a master tong weight of only 1760 lb (800 kg) and a combined weight of 2680 lb (1220 kg) . It achieves lightweight design while ensuring structural strength, facilitating on-site installation and movement. The 750 mm long master tong torque arm and optimized transmission ratios (3.39:1 and 13:1) ensure efficient and stable torque transmission, reducing energy loss. The high-strength alloy housing and sealing design enable it to adapt to high-temperature, high-humidity, and dusty drilling environments, with low failure rates during long-term operations and a long service life.
Technical Parameters: Core Configuration of KHT9625 CASING TONG
Item
Specific Parameters
Application Range
Master Tong: 2 7/8″--9 5/8″; Backup Tong: 2 7/8″--10 1/2″
Jaw Opening (Master Tong)
10″ (255 mm)
Jaw Speed
High gear: 65 RPM; Second high gear: 28 RPM; Second low gear: 16 RPM; Low gear: 6.5 RPM
Output Torque
High gear: 2700 ft.lb (3600 N·m); Second high gear: 5900 ft.lb (8000 N·m); Second low gear: 11500 ft.lb (15600 N·m); Low gear: 25000 ft.lb (34000 N·m)
Overall Dimension (L×W×H)
59″×31″×69″ (1500×790×1750 mm)
Weight
Master Tong: 1760 lb (800 kg); Combined with Backup Tong: 2680 lb (1220 kg)
Torque Arm Length
Master Tong: 29.5″ (750 mm); Combined Tong: 21.3″ (542 mm)
Measured Velocity Ratio
78 (open gear Z)/23 (big idle gear Z)=3.39; 78 (open gear Z)/6 (Speed measuring gear Z)=13
Jaw Specification
9.63″(244.5mm), 8.63″(219.1mm), 7.63″(193.7mm), 7″(177.8mm), 6.63″(168.3mm), 5.5″(139.7mm), 4.5″(114.3mm), 3.5″(88.9mm), 2.88″(73mm), 10.5″(266.7mm)
Spare Parts Support: Ensure Uninterrupted Operations
The continuity of drilling operations relies on reliable spare parts support. Core spare parts of the KHT9625 CASING TONG (such as jaws, seals, and hydraulic components) adopt a standardized design, perfectly matching the equipment to ensure easy replacement and consistent performance. Sufficient spare parts inventory can effectively shorten downtime, avoid construction delays caused by component damage, and reduce operational costs. We understand the importance of spare parts and provide comprehensive spare parts supply services to keep your operations "well-prepared."
Contact Us: Get Customized Solutions
If you are looking for high-performance, reliable casing tong equipment, or need KHT9625 CASING TONG and related spare parts, please feel free to contact us. Our professional team will provide one-stop services including technical consultation, product selection, and after-sales support to help your drilling projects proceed efficiently.
Contact Us: info@hyrig.com
KHT9625 CASING TONG — Empowering drilling operations with technological innovation, safeguarding project safety with reliable quality.