The Lanzhou Swivel SL225-2 Packing Assembly, identified by part number 104.05.30.00, is a precision-engineered sealing component manufactured by Lanzhou LS‑National Oilwell Petroleum Engineering Co., Ltd. It serves as the critical fluid seal between the stationary gooseneck and the rotating swivel stem, preventing high-pressure drilling mud from leaking during rotary drilling operations.
Design & Construction:
The packing assembly is of cartridge-type construction, comprising high-performance elastomeric seals and metal retention components. The seals are manufactured with high strength and good elasticity within the hardness range of Shore A60 to Shore A70. The assembly features excellent wear resistance – laboratory measurements show wear resistance 3 to 5 times that of natural rubber, with practical applications often reaching approximately 10 times. The packing also offers good oil resistance, chemical resistance, and cushioning properties.
Key Technical Specifications:
Part Number: 104.05.30.00
Material: High-strength elastomer with metal components
Standard: API Spec 8A / 8C
Hardness Range: Shore A60 – A70
Design: Cartridge type, quick replacement
Application: SL225-2 Drilling Swivel
Compatibility: SL135, SL225, SL450 models
Function:
The packing assembly creates a dynamic seal between the stationary gooseneck (fluid inlet) and the rotating swivel stem (fluid outlet), allowing high-pressure drilling mud to flow from the rotary hose through the gooseneck and into the rotating drill string without leakage. The cartridge-type design enables rapid replacement on the drill floor when seals become worn – only the upper and lower nuts need to be removed, and the entire assembly can be extracted from one side without disconnecting the rotary hose or gooseneck. This significantly reduces downtime during maintenance operations.
Compatibility:
This packing assembly is a direct OEM replacement part specifically designed for the Lanzhou SL225-2 dual-purpose drilling swivel. It is compatible with the ZJ40/2250D drilling rig system and equivalent API-standard swivel assemblies. The assembly also fits SL135, SL225, and SL450 swivel models.
Quality Assurance:
Each packing assembly is manufactured under rigorous quality control procedures, with seals precisely formulated to meet API 8A/8C specifications. The assembly is designed to withstand the maximum working pressure of 35 MPa (5000 psi) for the SL225-2 swivel system.
For pricing, technical specifications, or after‑sales support, please contact us:
Email: info@hyrig.com
Hyrig – Your Trusted Partner for Quality Oilfield Equipment
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.