Product Name: Lock Nut, Bearing
Part Numbers: 6123-6 | 658406509
This heavy-duty bearing lock nut (bearing retaining nut) is designed for Mission Magnum XP series pumps (M.S.24036 / 658416102) and is 100% interchangeable with Sandman MCM XL and TSC PF pump bearing lock nuts. The nut threads onto the pump shaft and secures the bearings (both inboard and outboard) in their correct axial position. It is typically used together with a lock washer or a set screw to prevent loosening under vibration.
Key Specifications
Material: High-strength alloy steel, heat-treated
Thread: Precision internal thread (OEM dimensions)
Features: Often includes a slot or keyway for lock washer tab or a set screw hole
Finish: Corrosion-resistant coating (zinc, phosphate, or black oxide)
Compatible with MECH. SEAL assemblies (24036 / 658416102)
Fits pump sizes: 8x6, 12x10, 14x12 (Mission Magnum XP series)
Material & Durability
Manufactured from heat-treated alloy steel, the lock nut provides high tensile strength and resistance to thread galling. Its precision threads ensure proper fit on the shaft. The nut is designed to withstand high axial loads and vibration without loosening.
Interchangeability
Direct replacement for Mission Magnum XP bearing lock nuts (MECH. SEAL 24036 / 658416102)
Also fits Sandman MCM XL and TSC PF pump shafts without modification
Same thread size, pitch, hex dimensions, and locking feature (slot or set screw) as OEM
Performance & Applications
The bearing lock nut is critical for maintaining bearing axial preload and shaft positioning. Typical applications include:
Securing inboard bearings on Mission Magnum XP pumps
Securing outboard bearings
Oil & gas hydraulic fracturing (frac pumps)
Mine dewatering and slurry transfer
Mineral processing pumps
Why choose this lock nut?
OEM fit for Mission Magnum XP / Sandman MCM XL / TSC PF (MECH. SEAL 24036 / 658416102)
Part numbers: 6123-6, 658406509
Heat-treated alloy steel for maximum strength
Precision threads for secure fit
Prevents bearing loosening and unplanned downtime
For technical drawings, thread specs, or bulk orders:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.