LSPE Crown Blocks | TC Series Complete Model Range
Overview:
HYRIG can supply the LSPE TC series crown blocks and their spare parts. This range includes models from TC135 to TC675, designed to be mounted at the top of the mast and guide the drilling line. They feature high-strength steel frames, intermediate frequency quenched sheaves, and double-row conical roller bearings.
| Model | Max Hook Load (kN) | Sheave O.D. (mm) | Number of Sheaves | Wire Line Dia. (mm) | Overall Dimension (mm) |
|---|---|---|---|---|---|
| TC135 | 1350 | 915 | 5 | 29 | 2500 x 2050 x 1920 |
| TC170 | 1700 | 1005 | 6 | 29 | 2687 x 2150 x 2046 |
| TC225 | 2250 | 1120 | 6 | 32 | 3200 x 3347 x 3640 |
| TC315 | 3150 | 1270 | 7 | 35 | 3295 x 2776 x 2514 |
| TC450 | 4500 | 1524 | 7 | 38 | 3068 x 2906 x 3576 |
| TC585 | 5850 | 1524 | 8 | 42 | 4494 x 3881 x 5130 |
| TC675 | 6750 | 1524 | 8 | 45 | 4594 x 3855 x 4411 |
Data source: Technical data table.
The overall dimensions and weight vary by model. The sheave cluster is tilted to counteract the traveling block's torque. The sheave grooves are intermediate frequency quenched to improve surface hardness.
The crown block is mounted at the top of the mast. It contains multiple sheaves that guide the drilling line between the drawworks and the traveling block. The fast-line sheave and dead-line sheave are designed to handle the highest speeds and loads.
Selecting the correct crown block requires matching the number of sheaves and the drilling line diameter to your traveling block and drawworks.
Tell us your line size and load capacity, and our engineers will assist.
Used in the hoisting system of drilling rigs to support the drilling line and guide it to the drawworks.
Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.
We supply replacement parts including sheaves, bearings, and shafts. Please visit our Hoisting Equipment Parts page.
Specifications:
FAQ:
Contact Us:
For LSPE crown block selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.