LSPE Drawworks | JC Series Mechanical & Electric
Overview:
HYRIG can supply the LSPE JC series drawworks and their spare parts. This range includes mechanical driven (JC40/50/70), DC motor driven (JC40D to JC90D), and AC VFD driven (JC40DB to JC90DB) models. They are designed for lifting and lowering the drill string in drilling rigs.
| Model | Drive Type | Rated Input Power (kW) | Max Fast-line Pull (kN) | Wire Line Dia. (mm) | Drum Size (mm) |
|---|---|---|---|---|---|
| JC40 | Mechanical | 735 | 275 | 32 | 640 x 1237 |
| JC50 | Mechanical | 1100 | 340 | 35 | 685 x 1245 |
| JC40D | DC Motor | 735 | 275 | 32 | 640 x 1235 |
| JC50D | DC Motor | 1100 | 340 | 35 | 685 x 1245 |
| JC70D | DC Motor | 1470 | 485 | 38 | 685 x 1245 |
| JC40DB | AC VFD | 735 | 275 | 32 | 640 x 1139 |
| JC50DB | AC VFD | 1100 | 340 | 35 | 685 x 1245 |
| JC70DB | AC VFD | 1470 | 485 | 38 | 770 x 1439 |
| JC90DB | AC VFD | 2210 | 640 | 45 | 914 x 1556 |
Data source: Technical data table.
The overall dimensions and weight vary by model. The AC VFD drawworks features a single-shaft type with a grooved drum. The brake system can be a hydraulic disc brake (water or air cooled) with motor dynamic braking as auxiliary.
The drawworks is the main hoisting mechanism of the rig. It converts rotary power into the linear motion of the drilling line. The mechanical and DC models utilize chain drives and air clutches, while the AC VFD models use a two-stage gear reducer with manual or auto shifting.
Selecting the correct drawworks requires matching the power rating and fast-line pull to your rig depth.
Tell us your rig depth and power source, and our engineers will assist.
Used in the hoisting system of drilling rigs to lift and lower the drill string.
Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.
We supply replacement parts including brake discs, clutch components, and drum bearings. Please visit our Drawworks Parts page.
Specifications:
FAQ:
Contact Us:
For LSPE drawworks selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.