JQHS Mining Pneumatic Winch | High Gas Area Air Winch
Overview:
HYRIG supplies the JQHS Mining Pneumatic Winch and its replacement parts. This air winch is certified for mining safety, specifically for high-gas and power-free zones.
| Model | Lifting Force | Max Speed | Power | Air Consumption |
|---|---|---|---|---|
| JQHS-20×40 | 20 kN | 40 m/min | 16 kW | ≤18.5 m³/min |
| JQHS-30×12 | 30 kN | 12 m/min | 13.2 kW | ≤12.7 m³/min |
| JQHS-80×10 | 80 kN | 10 m/min | 16 kW | ≤18.5 m³/min |
| JQHS-100×10 | 100 kN | 10 m/min | 30 kW | ≤25.6 m³/min |
Data source: Technical data table.
The winch uses a low-speed, high-torque air motor. It features a self-locking function to prevent runaway cars in the event of a sudden air supply failure.
Specifically used in coal mines, high-gas zones, and tunnel maintenance. Part of the Pneumatic Winch family.
HYRIG provides a full range of replacement parts for the JQHS mining series.
Specifications:
Contact Us:
For JQHS Mining Pneumatic Winch selection and spare parts, contact HYRIG: info@hyrig.com
Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.