Product Overview
HYRIG provides a complete range of Mission Magnum series centrifugal pump parts – from model 3×2×13 up to 10×8×14. All components are manufactured to OEM specifications and are 100% interchangeable with Mission Magnum XP, Sandman MCM XL, and TSC PF pumps. Whether you operate in oil & gas fracturing, mining slurry dewatering, or industrial abrasive transfer, HYRIG has the spare parts you need to minimize downtime and extend pump life.
Covered Models & Performance Range
| Model | Flow (GPM) | Head (ft) | Efficiency | Shaft Power (kW) |
|---|---|---|---|---|
| 3×2×13 | 220–264 | 72–92 | 65% | 7.5–10.5 |
| 4×3×13 | 264–352 | 72–92 | 65% | 9.5–13.0 |
| 5×4×14 | 352–528 | 79–92 | 65% | 15.0–20.0 |
| 6×5×11 | 528–880 | 79–92 | 65% | 22.0–30.0 |
| 6×5×14 | 880–968 | 79–92 | 65% | 28.0–35.0 |
| 8×6×11 | 968–1056 | 79–92 | 65% | 32.0–40.0 |
| 8×6×14 | 1056–1144 | 92–108 | 65% | 45.0–55.0 |
| 10×8×14 | 1144–1320 | 92–108 | 65% | 58.0–70.0 |
Note: The above data represents complete pump performance; HYRIG parts are fully compatible with all listed models.
Main Part Categories
Casings & Covers – Volute casings (8x6x18, 12x10x23, 14x12x22), front covers, split stuffing boxes, bearing covers.
Impellers & Wear Parts – High-chrome white iron impellers (clockwise rotation), impeller noses (hex, two-flat, ion nitride), lantern rings, wearplates.
Sealing Systems – Mechanical seal assemblies (M.S.24036 / 658416102), packing sets (8264-344-K, 8264-345-K), sleeve seals, oil seals (inboard bearing, bearing cover).
Bearings & Lubrication – Inboard/outboard bearings (20615-2, 20616-2, 20616-3), lock nuts, lock washers, grease fittings, breathers.
Shaft & Coupling – Pump shafts (24028-33), shaft sleeves (24029-21BZ), coupling keys, impeller keys.
Fasteners – All bolts, studs, nuts, washers, set screws, cap screws (Grade 5/8).
Special Tools – Impeller removal tool (24041), shaft holder (24042), impeller nose/nut tool (24040).
Material & Durability
Our parts are made from high-chrome white iron (>600 BHN), hardened alloy steel, and corrosion-resistant elastomers – specifically selected for abrasive slurry, frac fluid, and high‑vibration environments.
Interchangeability
Every HYRIG component is a direct OEM replacement. No modifications needed. All dimensions, bolt patterns, and torques match original Mission Magnum, Sandman MCM XL, and TSC PF specifications.
Applications
Oil & gas hydraulic fracturing (frac pumps)
Mine dewatering, tailings, and slurry transport
Mineral processing and aggregate pumping
Wastewater treatment (abrasive solids)
Pulp & paper stock transfer
Why Choose HYRIG?
Full model coverage from 3×2×13 up to 10×8×14
Same-day shipping on critical parts
Cost savings vs. OEM without compromising quality
Engineering support – drawings, material certs, torque specs
For technical support, pricing, or bulk orders:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.