The MSP 21-2M Packing Unit (Part No.: 3112030-02) is a critical annular blowout preventer (BOP) sealing element, serving as the “safety airbag” of the oil drilling well control system. Designed for Hydril MSP 21-2 Type annular BOPs, this conical composite packing unit features built-in multi-layer carbon steel reinforcement ribs and is manufactured in strict compliance with API 16A (4th Edition) standards. Its primary function is to urgently seal the wellbore and prevent blowouts under medium-low pressure drilling conditions.
| Item | Details |
|---|---|
| Product Model | GH 21"-2M / MSP 21-2M |
| Product Name | Packing Unit, MSP 21-2M NBR, API 16A |
| Part Number | 3112030-02 |
| Compatible Equipment | Hydril MSP 21-2 Type Annular Blowout Preventer |
| Executive Standard | API 16A (4th Edition) |
| Parameter | Value |
|---|---|
| Nominal Bore | 21-1/4 inches (21.25 in / 540 mm) |
| Inner Diameter (Open State) | 540 mm (can shrink to 0 in closed state) |
| Outer Diameter | Approximately 780 mm |
| Height | Approximately 260 mm |
| Structure Type | Conical Composite Packing Unit (with built-in reinforced steel plates) |
| Parameter | Value |
|---|---|
| Rated Working Pressure | 2000 psi (2M / 13.8 MPa / 138 bar) |
| Strength Test Pressure | 4000 psi (31.0 MPa, 1.5 × rated pressure) |
| Seal Test Pressure | 2200 psi (15.2 MPa, 1.1 × rated pressure) |
| Hydraulic Closing Pressure | 1200 – 1500 psi |
| Parameter | Value |
|---|---|
| Main Material | NBR (Nitrile Butadiene Rubber) |
| Reinforced Material | Built-in multi-layer carbon steel plate reinforcement ribs |
| Operating Temperature Range | -40°C ~ +120°C |
| Compatible Media | Oil-based drilling fluid, water-based mud, crude oil, natural gas |
| Hardness | Shore A 70 ± 5 |
| Elongation at Break | ≥ 300% |
| Tensile Strength | ≥ 18 MPa |
| Parameter | Value |
|---|---|
| BOP Closing Fluid Volume | 31.1 gallons (117.7 L) |
| BOP Opening Fluid Volume | 18.9 gallons (71.5 L) |
| BOP Bottom Flange Height | 52.5 inches (1334 mm) |
| Applicable Working Conditions | Onshore/offshore surface drilling, medium-low pressure well control, routine oil and gas well workover operations |
The MSP 21-2M packing unit is the core sealing component of the annular BOP, performing the following critical functions:
| Application | Description |
|---|---|
| Seal Annulus Around Tubing/Casing | When drill pipes or oil pipes are present in the well, the packing unit clamps the tubular string tightly, sealing the annular space between the tubular string and the wellbore wall to block the upward channel of high-pressure oil and gas |
| Full Closure of Empty Wellhead | When no tubular string is present in the well, the packing unit can be fully closed to achieve complete sealing of the wellhead |
| Seal Irregular Components | Adaptively seals the annulus between irregular objects (such as kelly pipes, logging cables, steel wire ropes) and the wellbore |
| Forced Operation Under Pressure | In the well-shut state, allows drill pipe tool joints to pass through forcibly, enabling snubbing operations (tripping under pressure) |
| Characteristic | Description |
|---|---|
| Excellent Oil Resistance | Resists erosion from crude oil, diesel oil, and drilling fluid; no swelling or softening during long-term use |
| Wear & Tear Resistance | Adapts to repeated friction from drill pipe tool joints, ensuring a long service life |
| Good Elastic Recovery | Quickly rebounds to its original shape after hydraulic pressure relief, maintaining stable performance during repeated opening and closing cycles |
| Medium-Low Pressure Adaptability | Suitable for 2000 psi pressure rating, applicable to routine drilling conditions without high temperature or high hydrogen sulfide (H₂S) content |
Onshore oil and natural gas drilling, workover, well testing, and completion operations
Medium-low pressure drilling wellhead control on offshore platforms
Geothermal well and shallow oil/gas well drilling
Well control protection for routine non-acidic (low H₂S) oil and gas wells
The MSP 21-2M Packing Unit (Part No. 3112030-02) is a reliable, API 16A-certified annular BOP sealing element designed for Hydril MSP 21-2 Type blowout preventers. With its NBR rubber construction, multi-layer carbon steel reinforcement, and robust pressure ratings, it delivers exceptional sealing performance across a wide range of oilfield applications. Its ability to seal around drill pipe, casing, and irregular components, combined with its durability in medium-low pressure environments, makes it an essential component for safe and efficient well control operations.
For technical specifications, cross-referencing, or quotation requests:
Email: info@hyrig.com
*24/7 professional support for oilfield sealing solutions.*
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.