MUD HOG Centrifugal Pump Impeller 1.1 Series
Overview:
The MUD HOG Centrifugal Pump Impeller 1.1 Series covers the impeller entries listed for the compact 1.1 centrifugal pump sizes. The catalog describes the 1.1 series as using a semi-open impeller design with back vanes. The impeller rows do not separately repeat the material; the catalog describes the 1.8 and 1.1 fluid-end wear components as hard iron.
Impeller List
| Description | Qty | Catalog Part Number |
|---|
| Impeller, 1 x 1-1/2C x 8.5 | 1 | 10521503 |
| Impeller, 1-1/2 x 2R x 8.5 | 1 | 10521502 |
| Impeller, 2 x 3R11 x 8.5 | 1 | 10521488 |
Design Notes
- Semi-open design: the 1.1 series uses the semi-open impeller design.
- Back vanes: all impellers have back vanes to reduce stuffing box cover wear and help limit contaminants entering the sealing area.
- Material: the catalog describes 1.8 and 1.1 fluid-end wear components as hard iron; the impeller rows themselves do not repeat the material.
- Impeller size code: the catalog includes a 1.1 impeller size code table. Confirm the required trim code when ordering.
Catalog Notes to Verify
- The 1.1 impeller rows in the catalog are tightly formatted. Confirm the exact size description and part number for 10521503, 10521502 and 10521488 before ordering.
Specifications:
- Impeller series: 1.1
- Impeller count: 3
- Material / type: Hard iron
- Catalog note: The 1.1 impeller rows in the catalog are tightly formatted. Confirm the exact size description and part number for 10521503, 10521502 and 10521488 before ordering.
- Applications: Impeller replacement and spare parts supply for MUD HOG 1.1 centrifugal pumps used in small-flow drilling mud and water transfer service.
Contact Us:
For impeller size confirmation or a spare parts quote, contact info@hyrig.com. HYRIG is a China leading manufacturer of MUD HOG Centrifugal Pump Impeller 1.1 Series.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.