Naphtha Stabilizer Reflux Pump GSG50-220

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The Naphtha Stabilizer Reflux Pump GSG50-220 is a horizontal centrifugal pump designed for naphtha stabilizer tower overhead condensate reflux. Rated flow 80-120 m³/h, head 220 m, temperature range -10°C to 120°C, design pressure up to 16 bar. Wetted parts are ductile iron/bronze. Mechanical seal (SiC/Carbon/EPDM) or gland packing available. Hydraulic efficiency ≥75%, NPSHr ≤5.2 m, MTBF ≥8000 hours. It precisely controls vapor-liquid balance, reduces product vapor pressure, and limits C3 content in dry gas below 0.5%, making it essential for crude distillation and delayed coker absorption stabilization units.

Conatct For Details
DetailReview(0)Additional

The Naphtha Stabilizer Reflux Pump GSG50-220 is a heavy‑duty horizontal centrifugal pump specifically engineered for naphtha stabilizer tower overhead condensate reflux service. It maintains the critical gas‑liquid equilibrium inside the stabilizer, efficiently removing LPG components from naphtha, reducing product vapor pressure to meet safe storage requirements, and limiting C3 content in dry gas to below 0.5% – thereby maximizing liquid hydrocarbon recovery.

Key Performance Parameters (Rated for GSG50-220)

  • Rated flow range: 80 – 120 m³/h
    (Minimum stable flow: 48 m³/h; Maximum adjustable flow: 144 m³/h – 60~110% operating flexibility)

  • Rated head: 220 m (corresponding differential pressure: 2157 kPa)

  • Speed range: 2950 – 3550 RPM

  • Rated power: 110 – 160 kW

Process Compatibility (Naphtha Stabilizer Service)

  • Temperature range: -10°C to 120°C – suitable for 40°C tower overhead condensate and process fluctuations.

  • Design pressure: Up to 16 bar (232 psi) – compatible with stabilizer operating pressure and vacuum to slight positive suction conditions.

  • Media handled: Naphtha, LPG, light hydrocarbon mixtures.

  • Wetted materials: Ductile iron / bronze – corrosion resistant and wear resistant.

Reliability & Efficiency

  • Sealing system: Mechanical seal (SiC/Carbon/EPDM) or optional gland packing – tailored to naphtha characteristics, extending seal life by 30%.

  • Hydraulic efficiency: ≥75%

  • NPSHr: ≤5.2 m – minimizes cavitation risk even with two‑phase media.

  • MTBF: ≥8000 hours – supports 24/7 continuous operation, matching plant on‑stream requirements of 8400 hours/year.

Mechanical Design (GSG50-220)

  • Inlet/Outlet: 50 mm (2″) × 25 mm (1″) with PN16 flanges (EN 1092-1) for easy installation.

  • Material standards: Pump casing in cast iron, impeller in ductile iron/bronze (optional), shaft in AISI 431 stainless steel – fully compliant with EN733.

  • Mounting: Horizontal, back pull‑out design – allows maintenance without removing suction/discharge piping, reducing downtime and maintenance cost.

Why Choose This Pump?

When your crude distillation unit or delayed coker absorption stabilization system demands a reliable, high‑efficiency pump for naphtha stabilizer reflux, the GSG50-220 delivers exceptional long‑term performance. Its robust hydraulic design, optimized sealing options, and EN733 construction make it the preferred solution for naphtha and light hydrocarbon reflux duties.

Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to support your project with technical data, selection assistance, and after‑sales service.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit