National 8-P-80 Mud Pump Parts and Spares — Easy Wearing Parts

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
API 7K National 8-P-80 mud pump parts and spares. Easy wearing parts include liners, pistons, piston rubbers, valve assemblies, valve seats, valve springs, fluid end modules, seals, and piston rods. 800 HP, 6.25 x 8.5 inch stroke, 5000 PSI. OEM part numbers available. Contact info@hyrig.com.

Conatct For Details
DetailReview(0)Additional

The National 8-P-80 (8P80) is an 800 HP triplex single-acting piston pump with a 6.25 inch x 8.5 inch (158.8 mm x 215.9 mm) bore and stroke configuration, rated for a maximum working pressure of 5,000 PSI. The pump is widely used in oil and gas drilling, water well drilling, and geological exploration. The 8-P-80 features a modular studded fluid end design that allows individual cylinder module replacement without disturbing adjacent cylinders, significantly reducing downtime and maintenance costs. Our National 8-P-80 mud pump parts and spares are manufactured to API 7K standards and are designed as direct replacements for OEM components.

Easy Wearing Parts for National 8-P-80 with OEM Part Numbers:

Fluid End Modules:

Fluid End Module Complete Assembly — OEM Part No. TS-FEMNAT8PCA (Qty 3)

Discharge Module, Studded (Includes Items 2–10) — OEM Part No. 1291280 (Qty 3)

Discharge Module Only — OEM Part No. 1291281 (Qty 3)

Suction Module, Studded (Includes Items 12–14) — OEM Part No. 1290338 (Qty 3)

Suction Module Only — OEM Part No. 1290339 (Qty 3)

Studs and Nuts:

Nut, Power Frame Stud — OEM Part No. 6300180 (Qty 24)

Stud, Power Frame — OEM Part No. 2408026 (Qty 24)

Nut, Liner Bushing Stud — OEM Part No. 6300120 (Qty 18)

Stud, Liner Bushing — OEM Part No. 2408025 (Qty 18)

Nut, Discharge to Suction Module Stud — OEM Part No. 6300241 (Qty 18)

Stud, Discharge Module to Suction Module — OEM Part No. 2408034 (Qty 18)

Nut, Threaded Ring Stud — OEM Part No. 6300220 (Qty 36)

Stud, Threaded Ring — OEM Part No. 2408019 (Qty 36)

Liner and Cylinder Components:

Bushing, Liner — OEM Part No. 1291165 (Qty 3)

Retainer, Seal — OEM Part No. 1290174 (Qty 6)

Cap, Valve Cover (Threaded) — OEM Part No. 1290307 (Qty 6)

Screw, Adjusting Wedge — OEM Part No. 1290178 (Qty 6)

Nut, Wedge Adjusting Screw — OEM Part No. 6300160 (Qty 6)

Washer, Wedge Adjusting Screw — OEM Part No. 1290315 (Qty 6)

Ring, Threaded — OEM Part No. 1290308 (Qty 6)

Locking Wedge Assembly — OEM Part No. G-1290376 (Qty 6)

Gasket, Valve Cover (G-768Z) — OEM Part No. 1540126 (Qty 6)

Valve Assembly and Components:

Retainer, Valve Guide Bushing — OEM Part No. 1292140 (Qty 6)

Bushing, Valve Guide — OEM Part No. 1292141 (Qty 6)

Pin, Dowell — OEM Part No. 6511416 (Qty 6)

Plate, Wear — OEM Part No. 1290357 (Qty 3)

Connectors and Adapters:

Connector, Discharge — OEM Part No. 1290342 (Qty 2)

Adapter, Discharge Connector — OEM Part No. 1290343 (Qty 2)

Seal, Discharge Connector to Discharge Adapter — OEM Part No. 2410031348 (Qty 2)

Seal, Discharge Connector & Discharge Adapter — OEM Part No. 2410031427 (Qty 4)

Liner Clamp Components:

Assembly, Liner Clamp — OEM Part No. 1291166 (Qty 3)

Capscrew, Liner Clamp — OEM Part No. 700040311 (Qty 6)

Nut, Liner Capscrew — OEM Part No. 6309100 (Qty 6)

Materials and Construction:

Each National 8-P-80 part is made from materials selected for demanding oilfield service. Fluid end modules use high-strength alloy forged steel. Liners use forged steel outer sleeves and high-chromium cast iron inner sleeves, or ceramic for extended life. Pistons use high-strength steel cores with HNBR or polyurethane cups. Valve bodies and seats use forged alloy steel with advanced heat treatment. Seals use NBR or HNBR rubber. All parts are precision machined to ensure proper fit and reliable performance.

Key Performance Advantages:

Our National 8-P-80 mud pump parts and spares offer high wear resistance, reliable sealing, and long service life. The modular studded fluid end design allows individual cylinder module replacement in the field without removing the entire hydraulic end, significantly reducing downtime and maintenance costs. Parts are compatible with water-based, oil-based, and synthetic drilling fluids.

Applications:

These parts are suitable for oil and gas drilling, water well drilling, geological exploration, and grouting operations.

Compatibility:

All listed parts are direct replacements for National 8-P-80 (8P80) mud pump components. The 8-P-80 shares the suction module (1290338) with the 9-P-100 and 10-P-130 models. No modification is required for installation.

Order Information:

MOQ: 5 pieces or sets, depending on the part. Custom materials, colors, and branding available. Standard export packaging. Delivery from stock or short lead time. For pricing, technical data sheets, or OEM inquiries, please contact us at info@hyrig.com.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit