The National JWS-165-L and JWS-340 are triplex single-acting plunger pumps engineered for intermittent high-pressure well service operations including cementing, acidizing, well stimulation, and workover applications. The JWS-165-L (also known as National 165T-5L) is rated at 165 HP with a 4-1/2 inch x 5 inch plunger and stroke configuration. The JWS-340 is rated at 340 HP with a 5 inch stroke, capable of maximum working pressures up to 10,000 PSI and maximum speeds up to 450 RPM. Both pumps share the same fluid end design and feature forged steel fluid ends, API #7 valve pots, and a compact, robust construction for reliable performance in demanding field conditions. Our National JWS-165 and JWS-340 well service pump parts and spares are manufactured to API 7K standards and are designed as direct replacements for OEM components.
Easy Wearing Parts for National JWS-165 and JWS-340 with OEM Part Numbers:
Cylinder Liners and Liner Gaskets:
Liner 3.5 inch — Part No. TS-0240-34HP
Liner 4 inch — Part No. TS-0240-40HP
Liner 4.5 inch — Part No. TS-0240-44Cr
Liner 4.5 inch (BL Series) — Part No. BL-0146-44HP
Liner 5 inch — Part No. BL-0146-50HP
Liner 5.5 inch — Part No. BL-0146-54HP
Liner 5.75 inch — Part No. BL-0146-56HP
Liner 6 inch — Part No. BL-0146-60HP
Liner 6.25 inch — Part No. BL-0146-62HP
Liner 6.5 inch — Part No. BL-0146-64HP
Liner 6.75 inch — Part No. BL-0146-66Cr
Liner Gasket 4 inch — Part No. G-925C
Liner Gasket (BL Series) — Part No. G-281
Pistons and Piston Rubbers:
Urethane Bonded Piston 3.5 inch — Part No. LLU-34-K10
Urethane Bonded Piston 4 inch — Part No. LLU-40-K10
Urethane Bonded Piston 4.5 inch — Part No. LLU-44-B10
Urethane Bonded Piston (BL Series) 4 inch — Part No. BL-U-40-K10
Urethane Bonded Piston (BL Series) 4.5 inch — Part No. BL-U-44-B10
Urethane Bonded Piston (BL Series) 5 inch — Part No. BL-U-50-B10
Urethane Bonded Piston (BL Series) 5.5 inch — Part No. BL-U-54-B10
Urethane Bonded Piston (BL Series) 5.75 inch — Part No. BL-U-56-B10
Urethane Bonded Piston (BL Series) 6 inch — Part No. BL-U-60-B10
Urethane Bonded Piston (BL Series) 6.25 inch — Part No. BL-U-62-L10
Urethane Bonded Piston (BL Series) 6.5 inch — Part No. BL-U-64-L10
Urethane Bonded Piston (BL Series) 6.75 inch — Part No. BL-U-66-L10
Rubber Bonded Piston 3.5 inch — Part No. LL-34-K10
Rubber Bonded Piston 4 inch — Part No. LL-40-K10
Rubber Bonded Piston 4.5 inch — Part No. LL-44-B10
Rubber Bonded Piston (BL Series) 4 inch — Part No. BL-40-K10
Rubber Bonded Piston (BL Series) 4.5 inch — Part No. BL-44-B10
Rubber Bonded Piston (BL Series) 5 inch — Part No. BL-50-B10
Rubber Bonded Piston (BL Series) 5.5 inch — Part No. BL-54-B10
Endurance Bonded Piston 4.5 inch — Part No. HPW-44-B10
Endurance Bonded Piston (BL Series) 4 inch — Part No. BL-I-40-K10
Endurance Bonded Piston (BL Series) 4.5 inch — Part No. BL-I-44-B10
Endurance Bonded Piston (BL Series) 5 inch — Part No. BL-I-50-B10
Endurance Bonded Piston (BL Series) 5.5 inch — Part No. BL-I-54-B10
Replaceable Rubber Piston 3.5 inch — Part No. I-34-K10
Replaceable Rubber Piston 4 inch — Part No. I-40-K10
Replaceable Rubber Piston 4.5 inch — Part No. I-44-B10
Replaceable Rubber Piston (BL Series) 4 inch — Part No. BL-I-40-K10
Replaceable Rubber Piston (BL Series) 4.5 inch — Part No. BL-I-44-B10
Replaceable Rubber Piston (BL Series) 5 inch — Part No. BL-I-50-B10
Replaceable Rubber Piston (BL Series) 5.5 inch — Part No. BL-I-54-B10
Piston Replacement Rubbers:
Piston Rubber 3.5 inch — Part No. TM-34-KR
Piston Rubber 4 inch — Part No. TM-40-KR
Piston Rubber 4.5 inch — Part No. TM-44-BR
Piston Rubber (BL Series) 4 inch — Part No. BL-40-KR
Piston Rubber (BL Series) 4.5 inch — Part No. BL-44-BR
Piston Rubber (BL Series) 5 inch — Part No. BL-50-BR
Piston Rubber (BL Series) 5.5 inch — Part No. BL-54-BR
Piston Rubber (BL Series) 6 inch — Part No. BL-60-BR
Piston Rubber (BL Series) 6.5 inch — Part No. BL-64-LR
Valve Assembly and Components:
Valve Assembly (Suction and Discharge) — Part No. 05-1561575, OEM Part No. 1561575
Valve Body Only — Part No. 05-1561560, OEM Part No. 1561560
Valve Disc Retainer — Part No. 05-1561566, OEM Part No. 1561566
Snap Ring — Part No. 05-1561515, OEM Part No. 1561515
Valve Insert (Urethane) — Part No. 05-1561577, OEM Part No. 1561577
Valve Insert (BL Series) — Part No. BL-5-WI
Valve Spring (Suction Valve) — Part No. 05-1712211, OEM Part No. 1712211
Valve Spring (Discharge Valve) — Part No. 05-1712206, OEM Part No. 1712206
Seat (Suction Valve) — Part No. 05-1561571, OEM Part No. 1561571
Seat (Discharge Valve) — Part No. 05-1561572, OEM Part No. 1561572
Seat (BL Series) — Part No. BL-5-M5B5
Seat O-Ring (Suction Valve) — Part No. 05-2410022-240, OEM Part No. 2410022-240
Seat O-Ring (Discharge Valve) — Part No. 05-2410022-244, OEM Part No. 2410022-244
Valve Cap Gasket — Part No. 06-2410031-429, OEM Part No. 2410031-429
Valve Cover Gasket (BL Series) — Part No. G-733
Plunger Packing and Stuffing Box Components:
Stuffing Box Gasket — Part No. 05-1712064, OEM Part No. 1712064
Plunger Packing 4 inch Adjustable — Part No. 06-G6400028, OEM Part No. G-6400028
Plunger Packing 3.5 inch Adjustable — Part No. 06-G6400022, OEM Part No. G-6400022
Plunger Packing 3 inch Adjustable — Part No. 06-G6400029, OEM Part No. G-6400029
Plunger Packing 4 inch Non-Adjustable — Part No. 06-6422346, OEM Part No. 6422346
Plunger Packing 3.5 inch Non-Adjustable — Part No. 06-6422343, OEM Part No. 6422343
Plunger Packing 3 inch Non-Adjustable — Part No. 06-6422340, OEM Part No. 6422340
Power End Components:
Wiper, Intermediate Rod — Part No. 05-1713297, OEM Part No. 1713297
Fluid Baffle — Part No. 05-1717016, OEM Part No. 1717016
Plunger Coupling — Part No. 05-1716037, OEM Part No. 1716037
Intermediate Rod, Clamp Type — Part No. 340-019
Intermediate Rod, Threaded Type — Part No. 340-023
Clamp Component, Plunger Intermediate Rod — Part No. 1716037
Crosshead Oil Reservoir Cover Plate — Part No. 1712014
Intermediate Rod Wiper Retainer — Part No. 1716009
Gasket, Intermediate Rod Wiper Retainer — Part No. 1716017
Fitting, Alemite 1/8 inch — Part No. 7805052
Gaskets:
Cylinder Head Gasket — Part No. G-925C (JWS-165), G-281 (BL Series)
Wear Plate Gasket — Part No. available
Materials and Construction:
Each National JWS-165 and JWS-340 part is made from materials selected for demanding high-pressure well service. Fluid ends use forged steel construction with API #7 valve pots. Liners are manufactured to API bore tolerances or better, providing longer life by reducing gaps between the liner bore and piston, with bore hardness of 62 to 69 Rockwell. Pistons use high-strength steel cores with urethane, rubber, or replaceable cup designs in bonded and endurance configurations. Valve bodies and seats use forged alloy steel with advanced heat treatment. Plunger packing uses premium rubber and fabric construction for reliable sealing under high pressure. Seals use NBR, HNBR, or urethane compounds suitable for acid, frac, and standard well service fluids. All parts are precision machined to ensure proper fit and reliable performance.
Key Performance Advantages:
Our National JWS-165 and JWS-340 well service pump parts and spares offer high wear resistance, reliable sealing, and long service life. The JWS-165-L and JWS-340 share a common fluid end design, simplifying inventory management and reducing spare parts costs. High-chrome liners provide bore hardness of 62 to 69 Rockwell with a service life of 800+ hours. The pumps are designed for intermittent high-pressure well service operations with maximum working pressures up to 10,000 PSI. Parts are compatible with water-based, oil-based, and synthetic service fluids.
Applications:
These parts are suitable for oilfield cementing, acidizing, well stimulation, workover operations, snubbing, and other high-pressure well service applications. The JWS-165-L is ideal for smaller well service rigs, while the JWS-340 handles demanding higher-pressure operations.
Compatibility:
All listed parts are direct replacements for National JWS-165-L and JWS-340 triplex plunger pump components. The JWS-165-L is also known as National 165T-5L. Parts are 100 percent interchangeable with OEM originals from TSC, BL (Better Drilling), and other major suppliers. No modification is required for installation.
Order Information:
MOQ: 5 pieces or sets, depending on the part. Custom materials, colors, and branding available. Standard export packaging. Delivery from stock or short lead time. For pricing, technical data sheets, or OEM inquiries, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.