NOV HT55 Manual Tong Compatible Replacement | 55,000 ft-lbs

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply a compatible replacement for the NOV HT55 manual tong. The NOV HT55 is a manual tong rated for 55,000 ft-lbs of torque, handling pipe from 3½ to 13⅜ in.
Conatct For Details
DetailReview(0)Additional

NOV HT55 Manual Tong Compatible Replacement | 55,000 ft-lbs

HYRIG can supply a compatible replacement for the NOV HT55 manual tong. The NOV HT55 is a manual tong rated for 55,000 ft-lbs (74,570 Nm) of torque, handling pipe from 3½ to 13⅜ in. (89 to 340 mm).

NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.

Key Facts

ParameterCompatible HT55 Replacement
Max Torque55,000 ft-lbs (74,570 Nm)
Size Range3½–13⅜ in. (89–340 mm)
Weight (less jaws)400 lbs (181 kg)
Lever TypeLong or Short Lever
Replacement CompatibilityReplaces NOV HT55 configurations

Data source: Technical data and parts list.

HT55 Compatible Specifications

ParameterHT55 Value
Lug Jaw 3½–5 in.35,000 ft-lbs (47,453 Nm)
Lug Jaw 5–6¾ in.55,000 ft-lbs (74,570 Nm)
Lug Jaw 6⅝–9 in.55,000 ft-lbs (74,570 Nm)
Lug Jaw 9–10¾ in.40,000 ft-lbs (54,232 Nm)

Explore the higher-torque replacement: NOV Manual Tongs Compatible Replacements.

Data source: Technical data and parts list.

Dimensions

DimensionHT55 Value
Size Range (inches)3.1/2 - 13.3/8
Size Range (mm)89 - 340
A max. Type (Long Lever)55.3/16 in. (1,401 mm)
A max. Type (Short Lever)49.3/16 in. (1,249 mm)

Structure / Working Principle

This compatible replacement uses interchangeable lug jaws to handle different pipe sizes. It can be assembled for make-up or break-out by turning the complete tong over.

Cross-Reference & Replacement

Looking to replace a NOV HT55? Check these points before ordering:

  1. Torque requirement: Confirm the maximum torque needed for your connections (up to 55,000 ft-lbs).
  2. Pipe size: Ensure the lug jaw size matches your pipe range.
  3. Lever type: Verify whether your setup requires a long lever or short lever.

Compatible Host Models

Used with standard rotary drilling rigs and manual pipe handling operations.

Applications

Used for making up and breaking out drill pipe, drill collars, and casing connections.

Disclaimer: HYRIG supplies lifting equipment for industrial applications. Please verify local safety regulations and request valid certification documents before use. Never exceed the rated load capacity.

Selection Support

Not sure if this compatible replacement will fit your NOV HT55 setup? Tell us your maximum pipe OD and required torque. Our engineers will verify the lug jaw requirements before you order.

Frequently Asked Questions

Q: Is this an original NOV product?
A: No. HYRIG supplies independent, compatible replacement products and is not affiliated with NOV.

Q: Will this replacement accept standard NOV HT55 lug jaws?
A: The replacement is designed to accept standard NOV HT55 lug jaw configurations.

Q: What is the maximum pipe size for the HT55 replacement?
A: It handles pipe up to 13⅜ in. (340 mm).

Q: What is the typical lead time?
A: Lead time depends on configuration. Contact HYRIG for a confirmed delivery estimate.

Contact

For NOV HT55 compatible replacements, contact HYRIG: info@hyrig.com

NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit