Product Name: Oil Seal, Inboard Bearing
Part Numbers: 20619-03 | 658413604
This heavy-duty inboard bearing oil seal is designed for Mission Magnum XP series pumps (M.S.24036 / 658416102) and is 100% interchangeable with Sandman MCM XL and TSC PF pump inboard bearing seals. The seal is installed on the shaft at the inner side of the bearing housing (closest to the pump casing). Its primary function is to retain lubricating oil within the bearing cavity while preventing abrasive slurry, dust, or moisture from migrating along the shaft and contaminating the bearings.
Key Specifications
Material: High-quality elastomer (nitrile rubber / NBR, or Viton for higher temperature)
Type: Lip seal with garter spring (typical) – OEM dimensions
Function: Oil retention and contaminant exclusion at inboard bearing location
Compatible with MECH. SEAL assemblies (24036 / 658416102)
Fits pump size: 8x6x18 (8" suction, 6" discharge, 18" impeller)
Material & Durability
Manufactured from oil-resistant and abrasion-resistant elastomers, the seal withstands continuous shaft rotation, temperature variation, and exposure to drilling fluids or slurry mist. The stainless steel garter spring maintains lip contact pressure for reliable sealing over long service intervals.
Interchangeability
Direct replacement for Mission Magnum XP 8x6x18 pumps (MECH. SEAL 24036 / 658416102)
Also fits Sandman MCM XL and TSC PF inboard bearing bore and shaft without modification
Same inner diameter, outer diameter, width, and lip geometry as OEM
Performance & Applications
Proper bearing oil seal function is critical for bearing life and pump reliability. Typical applications include:
Oil & gas hydraulic fracturing (frac pumps)
Mine dewatering and slurry transfer
Mineral processing pumps
Wastewater treatment pump maintenance
Why choose this oil seal?
OEM fit for Mission Magnum XP / Sandman MCM XL / TSC PF (MECH. SEAL 24036 / 658416102)
Part numbers: 20619-03, 658413604
High-quality elastomer for long life
Prevents bearing contamination and oil loss
Reduces unplanned downtime
For technical drawings, material specs, or bulk orders:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.