The OILWELL A-600-PT is a 600 HP triplex single-acting piston pump with a 7 inch x 8 inch bore and stroke configuration. The pump shares numerous fluid end components with the A-560-PT model and is widely used in oil and gas drilling, water well drilling, and geological exploration. The A-600-PT features the same robust power end design with fully welded steel frame, herringbone gear drive, and comprehensive pressure cycle lubrication system.
Easy Wearing Parts for OILWELL A-600-PT with OEM Part Numbers:
Cylinder Liners:
Ceramic Liner 4 inch — Part No. PPNO 07329400
Ceramic Liner 4.5 inch — Part No. PPNO 07329450
Ceramic Liner 5 inch — Part No. PPNO 07329500
Ceramic Liner 5.5 inch — Part No. PPNO 07329550
Ceramic Liner 6 inch — Part No. PPNO 07329600
Ceramic Liner 6.5 inch — Part No. PPNO 07329650
Ceramic Liner 7 inch — Part No. PPNO 07329700
Supreme Liner 4 inch — Part No. PPNO 05329400
Supreme Liner 4.5 inch — Part No. PPNO 05329450
Supreme Liner 5 inch — Part No. PPNO 05329500
Supreme Liner 5.5 inch — Part No. PPNO 05329550
Supreme Liner 6 inch — Part No. PPNO 05329600
Supreme Liner 6.5 inch — Part No. PPNO 05329650
Supreme Liner 7 inch — Part No. PPNO 05329700
Pistons and Rubber:
White Lightning Piston 4 inch — Part No. PPNO 1502052
White Lightning Piston 4.5 inch — Part No. PPNO 1502054
White Lightning Piston 5 inch — Part No. PPNO 1502056
White Lightning Piston 5.5 inch — Part No. PPNO 1502058
White Lightning Piston 6 inch — Part No. PPNO 1502060
White Lightning Piston 6.5 inch — Part No. PPNO 1502062
White Lightning Piston 7 inch — Part No. PPNO 1502064
Green Duo Piston 4 inch — Part No. PPNO 012180170
Green Duo Piston 5 inch — Part No. PPNO 012180254
Green Duo Piston 5.5 inch — Part No. PPNO 012180338
Green Duo Piston 6 inch — Part No. PPNO 012180395
Green Duo Piston 6.5 inch — Part No. PPNO 012180536
Green Duo Piston 7 inch — Part No. PPNO 012180619
Piston Rubber Flexlip 4 inch — Part No. PPNO 011102926
Piston Rubber Flexlip 5 inch — Part No. PPNO 011103033
Piston Rubber Supreme 4 inch — Part No. PPNO 015180102
Piston Rubber Supreme 5 inch — Part No. PPNO 015180186
Piston Rubber Supreme 6 inch — Part No. PPNO 015180269
Piston Rubber Supreme 7 inch — Part No. PPNO 015180343
Valve Assembly and Components:
Valve White Lightning Insert — Part No. PPNO 9700367 Roughneck, PPNO 9700359 Roughneck HP
Valve Urethane Insert — Part No. PPNO 9700285 Roughneck, PPNO 9700353 Roughneck HP
Valve Rubber Insert — Part No. PPNO 9702601
Valve Seat — Part No. PPNO 9702547
Valve Spring — Part No. PPNO 8201650
Valve Insert Urethane — Part No. PPNO 9705090
Valve Seat OEM Part No. — MK-6ADD-B6 4 Web, MK-6FO-S1 Full Open, MK-1561380 G2, MK-RN6-S6 Roughneck
Valve Seat Puller Head — Part No. MK-1700-6, MK-1700-6FO, MK-1700-6G2
Gaskets and Seals:
Valve Cover Gasket — Part No. PPNO 10268004
Cylinder Head Gasket — Part No. PPNO 10268004
Plug Seal — Part No. PPNO 061102653
Spring Stainless — Part No. PPNO 055403240
Fluid End Modules:
Complete Fluid End Assembly — Part No. A-8487-A for A-850-PT and A-1100-PT
Discharge Module Studded — Part No. A-8488-1
Suction Module Studded — Part No. A-8488-2
Rods and Related:
Piston Rod — Part No. PREM-20-150-123
Sub Rod — Part No. PREM-20-150-124
Crosshead Rod — Part No. PREM-10-241-003
Rod Clamp — Part No. PREM-16-484-114
Rod Nut — Part No. PREM-20-150-003
Materials and Construction:
Each OILWELL A-600-PT part is made from materials selected for demanding oilfield service. The power frame uses fully welded steel construction. The fluid end modules are forged from high-quality alloy steel and heat treated. Liners use forged steel outer sleeves and high-chromium cast iron inner sleeves, or ceramic for extended life. Pistons use high-strength steel cores with urethane or rubber cups. Valve bodies and seats use forged alloy steel with advanced heat treatment. Seals use NBR or HNBR rubber. All parts are precision machined to ensure proper fit and reliable performance.
Key Performance Advantages:
Our OILWELL A-600-PT mud pump parts and spares offer high wear resistance, reliable sealing, and long service life. The A-600-PT shares numerous fluid end components with the A-560-PT, simplifying inventory management and reducing spare parts costs. Parts are compatible with water-based, oil-based, and synthetic drilling fluids.
Applications:
These parts are suitable for oil and gas drilling, water well drilling, geological exploration, and grouting operations.
Compatibility:
All listed parts are direct replacements for OILWELL A-600-PT mud pump components. The A-600-PT shares numerous fluid end components with the A-560-PT model. No modification is required for installation.
Order Information:
MOQ: 5 pieces or sets, depending on the part. Custom materials, colors, and branding available. Standard export packaging. Delivery from stock or short lead time. For pricing, technical data sheets, or OEM inquiries, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.