PARKER D3W026H Directional Valve
Overview:
HYRIG can supply the PARKER D3W026H and related hydraulic components. This NG10 directional valve uses a 026 spool with an H-position configuration, providing a 2-position function with B and T blocked.
The 026 spool provides a 2-position function with B and T blocked. The H position indicates a single-solenoid, spring-offset configuration where the valve is P→B and A→T in the offset (de-energized) position.
Verify the spool type (026), spool position (H), and voltage code when replacing.
Used in PARKER D3W NG10 directional valve stacks. For related components, view PARKER D1VW & D3W Directional Valves.
Need to confirm the spool type or voltage for a 2-position application? Contact HYRIG with your requirements.
Suitable for medium-to-high flow hydraulic systems requiring 2-position directional control with B and T blocked.
Disclaimer: PARKER is a registered trademark of Parker Hannifin Corporation. HYRIG is an independent supplier of hydraulic components and is not affiliated with Parker Hannifin Corporation.
Specifications:
Contact Us:
For PARKER D3W026H selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.