PARKER D41VW Directional Valve Series (NG16)
Overview:
HYRIG can supply the PARKER D41VW series and related hydraulic components. These 5-chamber pilot-operated directional spool valves are designed for NG16 interfaces, providing reliable high-flow control with low pressure drop.
| Model Code | Spool Type | Centre Condition | Spool Position | Max Flow |
|---|---|---|---|---|
| D41VW030B | 030 | Open crossover | B (2-pos, spring offset) | 300 L/min |
| D41VW020B | 020 | Closed crossover | B (2-pos, spring offset) | 300 L/min |
| D41VW002C | 002 | All ports open | C (3-pos, spring centred) | 300 L/min |
| D41VW001C | 001 | All ports blocked | C (3-pos, spring centred) | 300 L/min |
| D41VW026H | 026 | B and T blocked | H (2-pos, spring offset) | 300 L/min |
Data source: PARKER catalog MSG14-2500/US and HY14-1600/US.
For the 030B spool variant, view PARKER D41VW030B. For the 020B spool variant, view PARKER D41VW020B.
Note: Other spool/position combinations (001C, 003C, 004C, 009C, 015C, 021C, 022C, 026H, 030D, etc.) are available on request.
| Parameter | Value |
|---|---|
| Mounting Standard | ISO 4401-07 (CETOP 7 / NFPA D07) |
| Mounting Bolt Pattern | 4 × M10 |
| Approx. Weight | 9.7–10.3 kg (depending on configuration) |
The spool type code (001/002/020/026/030 etc.) determines the flow paths in each position. The spool position code (B/C/H/D) specifies solenoid configuration and spring/detent behaviour. The voltage code (J = 24V DC, K = 12V DC) must be specified at order. All code positions must match when replacing.
Need to confirm the correct spool type, voltage, or pilot supply configuration for your NG16 circuit? Contact HYRIG with your system requirements, and we will match the correct D41VW model code.
Used for controlling the direction of high-volume hydraulic flow in large presses, injection molding machines, and heavy-duty industrial equipment.
Disclaimer: PARKER is a registered trademark of Parker Hannifin Corporation. HYRIG is an independent supplier of hydraulic components and is not affiliated with Parker Hannifin Corporation.
Specifications:
Contact Us:
For PARKER D41VW series selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.