PARKER D81VW002C Directional Valve
Overview:
HYRIG can supply the PARKER D81VW002C and related hydraulic components. This NG25 pilot-operated directional valve uses a 002 spool with a C-position configuration, providing an all-ports-open centre condition for flow circulation.
The 002 spool provides an all-ports-open centre condition (P, T, A, B all connected in the centre position). The C position indicates a double-solenoid, 3-position, spring-centred configuration: the spool returns to the all-ports-open centre when both solenoids are de-energized.
Verify the spool type (002), spool position (C), and voltage code (J = 24V DC, K = 12V DC) when replacing. The 002 spool requires a minimum pilot pressure of 6.9 bar (100 psi) rather than the standard 5.1 bar.
Used in PARKER D81VW NG25 pilot-operated directional valve stacks. For related components, view PARKER D41VW & D81VW Pilot Directional Valves.
Need to confirm the voltage or pilot pressure for a 002 spool application? Contact HYRIG with your system requirements.
Suitable for high-flow hydraulic systems requiring an all-ports-open centre condition for flow circulation or actuator float.
Disclaimer: PARKER is a registered trademark of Parker Hannifin Corporation. HYRIG is an independent supplier of hydraulic components and is not affiliated with Parker Hannifin Corporation.
Specifications:
Contact Us:
For PARKER D81VW002C selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.