Parker PGP51A578BEYM25-07 Cast Iron Fixed Displacement Gear Pump

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Parker PGP51A578BEYM25-07 (PGP51A578BEYM25-7) is a heavy-duty cast iron external gear pump. With 57.8 cm³/rev displacement, 2500 psi continuous pressure, and rugged three-piece housing, it delivers high volumetric efficiency and long service life for mobile and industrial hydraulic systems.

Conatct For Details
DetailReview(0)Additional

The Parker PGP51A578BEYM25-07 (commonly written as PGP51A578BEYM25-7) belongs to Parker Hannifin’s renowned PGP51 series of cast iron external gear pumps. Designed for high-pressure, large-displacement, and extreme-durability applications, this single-section pump is a trusted choice for demanding mobile and industrial hydraulic systems.

Key Features & Design Advantages

  • Three-piece cast iron housing – Exceptional strength and shock resistance for harsh environments.

  • Pressure-balanced wear plates – Minimize internal leakage and maintain high volumetric efficiency over the pump’s life.

  • Heavy-duty sleeve bushings and needle/roller bearings – Reduce noise, extend bearing life, and handle continuous high loads.

  • Dual-arc sinusoidal gear tooth profile – Eliminates fluid trapping, reduces wear, and ensures smooth, quiet operation.

  • Multiple shaft, flange, and port options – The -07 version specifies SAE B mounting and SAE B ⅞” 13T spline shaft.

Typical Applications

  • Excavators, wheel loaders, bulldozers

  • Cranes, forklifts, telescopic handlers

  • Heavy-duty trucks and utility vehicles

  • Hydraulic power units (HPUs)

  • Agricultural machinery (tractors, harvesters)

  • Industrial presses and material handling equipment

Technical Specifications (P51A578BEYM25-07)

ParameterValue
SeriesPGP51 (P51)
Pump typeFixed displacement, external gear, single section
Displacement57.8 cm³/rev (3.53 cu.in/rev)
Rated pressure2500 psi (172 bar)
Peak pressure3000 psi (207 bar)
Max. continuous speed2400 rpm
Theoretical flow @2400 rpm~202.9 L/min (53.6 GPM)
Housing materialCast iron
Rotation (shaft end view)Clockwise (counterclockwise optional)
Shaft typeSAE B ⅞” – 13T involute spline
Mounting flangeSAE B 2-bolt / 4-bolt (also available with 6-hole round flange)
PortsSAE straight thread / flange ports
Temperature range (NBR seals)-20°C to +80°C (-4°F to +176°F)
Optional sealsFKM (Viton) for high-temperature or aggressive fluids
WeightApprox. 45 kg (99 lb)
Dimensions (L×W×H)~250 mm × 180 mm × 200 mm (9.8” × 7.1” × 7.9”)

Model Code Breakdown (P51A578BEYM25-07)

CodeMeaning
P51PGP51 series
AStandard cast iron housing
578Displacement 57.8 cm³/rev
BSAE B mounting flange
ESAE B ⅞” 13T spline shaft
YMPort & seal configuration code
25Rated pressure 2500 psi
07Design / revision number

Note: The pump is also referred to as PGP51A578BEYM25-7 in some literature. Always verify the full model code before ordering.

Why Choose This Pump?

The PGP51A578BEYM25-07 delivers reliable high-pressure flow for heavy-duty cycles. Its robust cast iron construction and pressure-balanced design reduce maintenance downtime, while the high displacement (57.8 cc/rev) ensures powerful actuation of large hydraulic cylinders and motors. Whether you are retrofitting an excavator or building a custom power unit, this Parker pump offers proven performance.


Need a quote or technical support?
Contact us: info@hyrig.com


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit