Perforating Gun Series | Conventional & Horizontal Guns
Overview:
HYRIG can supply the complete perforating gun series and their spare parts. This range includes conventional perforating guns, horizontal well guns, full bore guns, and compound perforating guns. They are designed for perforating operations in various well conditions, including deep wells, horizontal wells, and high-pressure/high-temperature (HPHT) environments.
| Type | Gun O.D. (mm) | Shot Density (holes/m) | Phase Angle | Max Pressure (MPa) | Max Temp (°C) |
|---|---|---|---|---|---|
| Conventional | 89 - 127 | 13 - 40 | 60° - 150° | 105 - 175 | 150 - 210 |
| Horizontal | 89 - 127 | 12 - 16 | 90° - 180° | 105 - 140 | 150 - 210 |
| Full Bore | 89 - 127 | 16 - 20 | 60° - 90° | 105 - 140 | 150 - 210 |
| Compound | 89 - 127 | 13 - 20 | 60° - 90° | 105 - 140 | 150 - 210 |
Data source: Technical data table.
The gun length ranges from 1 to 6 meters. The connection threads are typically 2 3/8" UP TBG or 2 7/8" TBG. The charge type and arrangement must be specified for the specific application.
Perforating guns use shaped charges to create holes in the casing and formation. The conventional gun uses a sealed gun body. The full bore gun drops its internal components into a "sack" gun after firing, allowing full-bore access for subsequent operations. The compound gun combines perforating with high-energy gas fracturing to improve near-wellbore permeability.
Selecting the correct perforating gun requires considering the well type, casing size, and reservoir characteristics.
Tell us your well parameters, and our engineers will assist.
Used in the oil and gas industry to create perforations in the casing and cement, allowing formation fluids to flow into the wellbore.
Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.
We supply replacement parts including gun bodies, charge carriers, and firing heads. Please visit our Perforating Gun Parts page.
Specifications:
FAQ:
Contact Us:
For perforating gun selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.