Product Name: Plug, Grease (Grease Fitting / Zerk)
Part Numbers: 8505-1 | 601474695
This grease plug (also known as a grease fitting, Zerk fitting, or lubrication nipple) is designed for Mission Magnum XP series pumps (M.S.24036 / 658416102) and is 100% interchangeable with Sandman MCM XL and TSC PF pump grease fittings. The fitting is installed in threaded ports on bearing housings, bearing covers, or other lubricated components. It allows a grease gun to be attached for injecting lubricant into the bearing cavity without disassembly, ensuring proper lubrication and extending bearing life.
Key Specifications
Type: Standard hydraulic grease fitting (Zerk)
Material: Zinc-plated carbon steel (or stainless steel – confirm OEM)
Thread: Typically 1/4" NPT, 1/8" NPT, or metric (OEM dimensions)
Design: Straight, 45°, or 90° as OEM (assume straight unless specified)
Function: Provides access point for grease gun to lubricate bearings
Compatible with MECH. SEAL assemblies (24036 / 658416102)
Fits pump sizes: 8x6, 12x10, 14x12 (Mission Magnum XP series)
Material & Durability
Manufactured from zinc-plated carbon steel, the fitting resists corrosion from moisture and mild chemicals. The precision-machined ball check valve ensures grease enters but contaminants cannot backflow.
Interchangeability
Direct replacement for Mission Magnum XP grease plugs (MECH. SEAL 24036 / 658416102)
Also fits Sandman MCM XL and TSC PF threaded ports without modification
Same thread size, profile, and overall length as OEM
Performance & Applications
Regular greasing through these fittings is essential for bearing health. Typical applications include:
Lubricating inboard and outboard bearings
Greasing bearing housings and pedestals
Oil & gas hydraulic fracturing (frac pumps)
Mine dewatering and slurry transfer
Mineral processing pumps
Why choose this grease plug?
OEM fit for Mission Magnum XP / Sandman MCM XL / TSC PF (MECH. SEAL 24036 / 658416102)
Part numbers: 8505-1, 601474695
Standard Zerk design for easy lubrication
Corrosion-resistant zinc plating
Prevents bearing failure from under-lubrication
For technical drawings, thread specs, or bulk orders:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.