Recovery Lean Amine Pumps – API 610 BB2, OH & VS

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Our API 610 recovery lean amine pumps are available in BB2, OH, and VS designs, specifically engineered for the reliable recovery, transfer, and reclaiming of lean amine solution – the regenerated amine solvent (MEA, DEA, MDEA) – from reclaimers, flash drums, and accumulation vessels back to the amine circulation loop in natural gas sweetening, refinery gas treating, and petrochemical plants. BB2 pumps with radially split between‑bearings construction are the preferred choice for reliable lean amine recovery, delivering stable flow with excellent rotor rigidity and corrosion resistance. OH pumps serve smaller recovery and booster services, while VS pumps handle low‑NPSH suction. Built with stainless steel, duplex, and high‑alloy materials to withstand amine corrosion and heat‑stable salt attack. Fully API 610/ISO 13709 and NACE MR0175 compliant for reliable, safe lean amine recovery.

Conatct For Details
DetailReview(0)Additional

Our API 610 recovery lean amine pumps are heavy‑duty centrifugal pumps engineered specifically for the reliable recovery, transfer, and reclaiming of lean amine solution – the regenerated amine solvent (MEA, DEA, MDEA, or formulated amines) – from reclaimers, flash drums, accumulation vessels, and filter systems back to the amine circulation loop in natural gas sweetening, refinery gas treating, petrochemical plants, and syngas purification units. Lean amine recovery is essential for maintaining amine inventory, removing degradation products, and ensuring efficient acid gas removal. The recovered lean amine is characterised by elevated temperatures (typically 100‑150°C), high alkalinity (pH 9‑12), and may contain heat‑stable salts and degradation products that demand pumps with exceptional corrosion resistance, robust sealing, and reliable performance under continuous or intermittent operation. Manufactured in strict compliance with the latest edition of API 610 (ISO 13709), these pumps are designed for trouble‑free operation in demanding amine recovery applications. The API 610 standard provides three primary configurations – OH (Overhung), BB (Between Bearings), and VS (Vertically Suspended) – with the BB2 type being the preferred choice for main lean amine recovery duties.

API 610 Classifications for Recovery Lean Amine Duties

  • BB2 – Between Bearings Pumps (Preferred for Main Recovery)
    For main high‑capacity lean amine recovery from reclaimers or flash drums to the amine circulation loop, BB2 pumps (radially split, single‑stage or two‑stage) provide superior rotor stability and long‑term reliability. Flows from 20 to 2,000 m³/h and heads up to 250 metres are common. The between‑bearings arrangement minimises shaft deflection, extending seal and bearing life – critical when handling corrosive amine with degradation products. Radially split casings offer superior pressure containment and safety, with centreline support for thermal expansion management. Axially split BB3 configurations are also available for applications requiring easy internal inspection.

  • OH – Overhung Pumps
    For moderate‑capacity lean amine recovery, booster duties, or smaller reclaiming systems, OH pumps offer a compact and cost‑effective solution. The OH2 (horizontal, centreline‑mounted) and OH3 (vertical inline) subtypes are widely used for lean amine transfer from small reclaimers, filter systems, and auxiliary recovery loops. Centreline mounting accommodates thermal expansion. Their back‑pull‑out design allows easy seal and impeller maintenance without disturbing piping. Single‑stage OH pumps handle flows up to 500 m³/h and heads up to 150 metres.

  • VS – Vertically Suspended Pumps
    In applications where lean amine is drawn from low‑NPSH surge drums, sumps, or collection vessels, VS pumps provide excellent suction performance. VS1 (vertical turbine) and VS4 (vertical sump) types submerge the impeller below the liquid level, eliminating cavitation and priming problems. Their vertical footprint saves valuable plot space.

Key Performance & Design Features

  • Flow Range – Capacities from 5 m³/h to 2,500 m³/h, covering all lean amine recovery requirements.

  • Head Range – Up to 300 metres for high‑head transfer to amine circulation loops.

  • Temperature Range – Designed for lean amine from ambient up to 150°C (302°F), with appropriate material selection.

  • Pressure Rating – Discharge pressures up to 50 barg, matching recovery system conditions.

  • Corrosion Resistance – Wetted parts manufactured from stainless steels (316L, duplex, super duplex), nickel‑based alloys (Alloy 20, Hastelloy), and corrosion‑resistant materials to withstand amine corrosion, stress corrosion cracking, and attack from heat‑stable salts. Full NACE MR0175/ISO 15156 compliance for sour service.

  • Solids Handling – Open or semi‑open impeller designs to handle small amounts of particulates, filter media carryover, or degradation products.

  • Sealing – API 682 mechanical seals – dual (tandem or pressurised) seals are strongly recommended for lean amine service to prevent leakage of corrosive, hazardous fluids. Suitable flush plans (Plan 11, 13, 32, 53A/B, 62) with cooling and quench to maintain seal integrity. Plan 62 (steam quench) may be used to prevent amine salt crystallisation.

  • Casing Design – Robust casings with replaceable wear rings and impeller shrouds; smooth internal surfaces to minimise amine degradation and fouling.

  • Bearing & Lubrication – Heavy‑duty bearings (oil or grease lubricated) with temperature and vibration monitoring for predictive maintenance.

  • Impeller Options – Closed impellers for efficient handling; open or semi‑open designs for streams with fouling or solids.

  • Material Classes – Available in all API 610 material classes suitable for amine service (S‑5, S‑6, S‑8, C‑6, A‑7, A‑8, D‑1, D‑2) as per application requirements.

Typical Applications

  • Lean amine recovery from amine reclaimers and distillation columns

  • Lean amine transfer from flash drums and accumulation vessels

  • Amine solution recovery from filter systems and spent amine handling

  • Lean amine return to circulation loops in gas sweetening units

  • Recovery of MDEA, DEA, or MEA from heat‑stable salt removal systems

  • Lean amine handling in amine regeneration and reclaiming processes

Industries Served

  • Natural gas processing (amine sweetening and reclaiming)

  • Oil refineries (gas treating, LPG treating)

  • Petrochemicals (syngas and hydrogen purification)

  • Fertiliser and ammonia plants

  • Sulfur recovery units (Claus process tail gas treating)

Why Choose Our Recovery Lean Amine Pumps?

With extensive experience in corrosive amine handling and full API 610 compliance, we design and manufacture recovery lean amine pumps that deliver exceptional safety, reliability, and corrosion resistance. Every pump undergoes rigorous hydrostatic testing, performance curve verification, and comprehensive NDT inspections (radiographic, ultrasonic, dye penetrant) with complete documentation to meet the most stringent international specifications. We offer customised material grades, seal systems, and hydraulic designs tailored to your specific amine type, operating pressure, temperature, and degradation product profile. Our engineering support includes NPSH analysis, API 684 rotor dynamics, material compatibility evaluation, and emissions control advisory to ensure long‑term, trouble‑free operation.

Contact Us

For technical datasheets, application engineering advice, or a project‑specific quotation, please contact us at:

info@hyrig.com

Rely on our API 610 recovery lean amine pumps to maintain reliable lean amine recovery and reclaiming in your gas treating systems.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit