Our API 610 reformer product separator drum bottom pumps are heavy‑duty centrifugal pumps engineered specifically for the reliable recovery and transfer of C6‑C9 aromatic liquids from the bottom of reformer product separator drums in catalytic reforming units. In catalytic reforming, the reactor effluent is cooled and separated in a product separator drum (also called a high‑pressure separator or HP separator). The liquid phase collected at the bottom of this drum consists primarily of C6‑C9 aromatics – benzene, toluene, ethylbenzene, and xylenes (BTEX) – along with paraffins and naphthenes. This aromatic‑rich liquid is a valuable feedstock for petrochemical production (aromatics extraction) and gasoline blending (high‑octane reformate). The liquid is characterised by elevated temperatures (typically 100‑180°C), moderate volatility, low viscosity, and often contains trace hydrogen, H₂S, and other components. Pumps for this service demand robust construction, reliable sealing, and resistance to aromatic hydrocarbon corrosion. Manufactured in strict compliance with the latest edition of API 610 (ISO 13709), these pumps are designed for continuous, safe, and efficient operation. The API 610 standard provides three primary configurations – OH (Overhung), BB (Between Bearings), and VS (Vertically Suspended) – with the BB5 barrel‑type pump often preferred for higher pressure recovery duties.
API 610 Classifications for Reformer Product Separator Duties
BB5 Barrel‑Type Pumps (Preferred for High‑Pressure Recovery)
For high‑pressure aromatic liquid transfer from product separator drums, the BB5 subtype (barrel‑type, double‑casing, multistage) is the preferred configuration for pressures exceeding 50 barg. The inner casing contains multistage impellers, while the heavy‑walled outer barrel provides absolute pressure containment – a critical safety feature. BB5 pumps deliver heads up to 2,500 metres and flows up to 800 m³/h. The double‑casing design and centreline mounting accommodate thermal expansion.
BB – Between Bearings Pumps
For high‑capacity aromatic liquid transfer at moderate pressures, BB pumps provide superior rotor stability and long‑term reliability. BB2 (radially split, single‑stage) and BB3 (axially split, multistage) configurations are specified for medium‑pressure recovery duties where barrel‑type construction is not required.
OH – Overhung Pumps
In product separator systems, OH pumps are typically employed for auxiliary transfer or smaller recovery applications where pressures are lower. The OH2 (horizontal, centreline‑mounted) and OH3 (vertical inline) subtypes provide compact, cost‑effective solutions for smaller‑scale recovery services.
VS – Vertically Suspended Pumps
VS pumps are used for low‑NPSH suction from separator drums and sumps. VS1 (vertical turbine) and VS6 (vertical can/barrel) types are utilised where suction conditions are challenging and floor space is limited.
Key Performance & Design Features
Pressure Capability – Discharge pressures from 10 barg up to 200 barg, matching product separator system requirements.
Flow & Head – Capacities from 10 m³/h to 1,000 m³/h; multistage hydraulics generate heads up to 2,500 metres.
Temperature Range – Engineered for aromatic liquids from ambient to 180°C (356°F), with appropriate material selection.
NPSH Performance – VS and specially designed BB/OH pumps with inducers achieve low NPSH requirements.
Materials – Wetted parts in low‑temperature carbon steel, stainless steels (304L, 316L, duplex), and corrosion‑resistant alloys to withstand aromatic hydrocarbon corrosion. Full NACE MR0175/ISO 15156 compliance available for sour service.
Casing Integrity – BB5 barrel casing designed to ASME Section VIII or equivalent codes, hydrostatically tested at 1.5x maximum working pressure.
Sealing – API 682 dual mechanical seals with Plan 53A/B/C or Plan 72/75/76 seal support systems for volatile hydrocarbon service.
Advanced Balancing – Hydraulic balance drums or discs with independent leakage lines to neutralise axial thrust, coupled with heavy‑duty thrust bearings.
Rotor Dynamics – Rigorous API 684 analysis ensures lateral and torsional critical speeds are well above the operating range.
Bearing & Lubrication – Forced oil lubrication systems with bearing temperature/vibration transmitters for continuous condition monitoring.
Typical Applications
Aromatic liquid recovery from reformer product separator drums
Transfer from HP separator to downstream stabilizer or aromatics extraction units
Reformate liquid transfer to storage or further processing
C6‑C9 aromatic recovery in catalytic reforming units
BTX feedstock supply to petrochemical aromatics plants
Industries Served
Oil refineries (catalytic reforming, aromatics production)
Petrochemicals (benzene, toluene, xylene production)
Gas processing (condensate upgrading)
Why Choose Our Reformer Product Separator Drum Bottom Pumps?
With specialised expertise in refinery hydrocarbon handling and full API 610 compliance, we design and manufacture reformer product separator drum bottom pumps that deliver best‑in‑class safety, reliability, and efficiency. Every pump undergoes rigorous hydrostatic testing at 1.5x maximum working pressure, performance curve verification, mechanical running tests, and comprehensive NDT inspections (radiographic, ultrasonic, magnetic particle, dye penetrant) with full documentation to meet the most stringent owner‑operator specifications. We provide full engineering support – including API 684 rotor dynamics analysis, NPSH margin calculations, and seal system design – to ensure seamless integration into your catalytic reforming unit. All materials are supplied with complete traceability and certified test reports.
Contact Us
For technical datasheets, API 684 analysis reports, or a project‑specific quotation, please contact us at:
info@hyrig.com
Partner with us to reliably recover valuable aromatic liquids from your reformer product separator drums.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.