REXROTH 4WE10J5X/EG24N9K4 Directional Valve
Overview:
HYRIG can supply the REXROTH 4WE10J5X/EG24N9K4 and related hydraulic components. This NG10 directional valve uses a J-type spool with a center bypass position, allowing pump flow to return to tank when the valve is centered.
The J spool provides a center bypass position: in the center position, pump flow (P) is connected to tank (T), while ports A and B are blocked. This allows the pump to unload when the valve is centered.
Verify the spool type (J), voltage (G24 = 24V DC), and manual override (N9) when replacing. The 5X series (50–59) has unchanged installation dimensions.
Used in REXROTH NG10 directional valve stacks. For related components, view REXROTH 4WE Directional Valves.
Need to confirm whether center bypass (J) or center closed (E/G) is required for your application? Contact HYRIG with your circuit details.
Suitable for medium-to-high flow systems where pump unloading is required in the center position, such as certain press and machine tool circuits.
Disclaimer: REXROTH is a registered trademark of Bosch Rexroth AG. HYRIG is an independent supplier of hydraulic components and is not affiliated with Bosch Rexroth AG.
Specifications:
Contact Us:
For REXROTH 4WE10J5X/EG24N9K4 selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.