RG Petro Iron Roughneck | High Torque Makeup & Breakout
Overview:
HYRIG can supply the RG Petro Iron Roughneck and its spare parts. This automated tool is designed for making up and breaking out drill pipes, featuring a maximum makeup torque of 66,380 lb-ft and a spinning speed of 40-90 rpm. It significantly improves safety and efficiency by replacing manual tongs.
| Dimension Item | Specification |
|---|---|
| Connection Height | 26.62 - 49.80 in |
| Weight | 6,631 lbs |
| Installation | Permanently installed on rig floor |
The iron roughneck combines a spinning wrench and a high-torque wrench in one unit. It is mounted on a guide rail and moves hydraulically to engage the drill pipe. The spinning wrench rotates the pipe to make up the connection, and the torque wrench applies the final high torque.
This iron roughneck is designed for standard drilling rigs. Verify the drill pipe size range and the required makeup torque before selection. It requires a hydraulic power unit (HPU) to operate.
Need help sizing an iron roughneck for your rig? Tell us your drill pipe size and torque requirements, and our engineers will provide the correct model. For the power source, view our HPU and Components.
Used on drilling rigs to automate the connection and disconnection of drill pipes, reducing manual labor and improving safety on the drill floor.
Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.
We supply replacement parts including spinning rollers, torque jaws, and hydraulic cylinders for the iron roughneck. Please see our Wellhead Tools page.
Specifications:
FAQ:
Contact Us:
For RG Petro Iron Roughneck selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.