640203476 SandMaster Magnum I Pump 5x4x14 Oil | HYRIG

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Part 640203476 is a SandMaster Magnum I Pump, 5x4x14, Oil, No HA, Hard Iron. HYRIG provides this aftermarket replacement for Mission Magnum pumps. Manufactured in China. Contact info@hyrig.com for a quote. Contact HYRIG for pricing and lead time.
Conatct For Details
DetailReview(0)Additional

Part 640203476 is a SandMaster Magnum I Pump, 5x4x14, Oil, No HA, Hard Iron. HYRIG provides this aftermarket replacement for Mission Magnum pumps. Manufactured in China. Contact info@hyrig.com for a quote. These pumps serve drilling fluid circulation, desander/desilter feed, and abrasive slurry transfer in solids control and mining systems.

Key Facts

  • Part Number: 640203476
  • Type: Centrifugal Pump Unit
  • Pump Series: SandMaster Magnum I

Key Specifications

Data source: Product catalog and pump selection guide

ParameterValue
Part No.640203476
ModelSandMaster Magnum I
ConfigurationSandMaster Magnum I Pump, 5x4x14, Oil, No HA, Hard Iron
Frame Size5x4X1
LubricationOil-lubricated
MaterialHard Iron
Pump SeriesSandMaster Magnum I / Mission Magnum
CategorySolid Control Equipment

Working Principle

The SandMaster Magnum I is a horizontal centrifugal pump engineered for abrasive and corrosive slurry service. Its impeller converts driver power into kinetic energy; the casing volute then converts that energy into pressure head, moving drilling fluid, process water, or tailings through the system. Grease- or oil-lubricated bearing frames and a range of seal options (mechanical seal, packing, or flush-port configurations) let the pump be matched to site conditions.

Cross-Reference & Replacement

  1. Model Match: Confirm your pump tag specifies 640203476 and the frame size.
  2. Related Configurations: Related SandMaster Magnum I configurations: 640203655 SandMaster Magnum I Pump, 5x4x14, Grease w/ODMS, HA-C, Mechanical Seal, Hard Iron, 640120623 SandMaster Magnum I Pump, 3x2x13, Grease, HA-CW, Mechanical Seal, Aluminum Bronze, 640203255 SandMaster Magnum I Pump, 8x6x14, Grease, HA-C, High Chrome.

Selection Support

Tell us your flow, head, fluid density, and solids content, and our engineers will confirm the correct frame and seal configuration.

  • Confirm the frame size (5x4X1), lubrication, and seal type before ordering.

Applications

  • Oil & Gas Drilling: Mud circulation, desander/desilter feed, and transfer pumps for solids control.
  • Mining & Mineral Processing: Abrasive tailings and process slurry transfer.

Disclaimer: Ensure strict compliance with local safety standards and verify engineering drawings prior to installation.

Frequently Asked Questions

Q1: Is this pump supplied as a complete unit or bare shaft?
A: HYRIG can supply SandMaster Magnum I pumps as complete units or as bare-shaft assemblies. Please confirm your requirement when requesting a quote.

Q2: Are spare parts interchangeable with Mission Magnum?
A: HYRIG supplies aftermarket replacement SandMaster Magnum I pumps and spare parts dimensionally compatible with the Mission Magnum range.

Contact

For 640203476 pump sourcing, contact HYRIG: info@hyrig.com HYRIG is an industrial equipment supplier providing solids control equipment, pumps, and spare parts to mining and oil & gas operators worldwide.

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit