Product Name: Seal, Bearing Housing
Part Numbers: 7496-272 | 658408901
This heavy-duty bearing housing seal is designed for Mission Magnum XP series pumps (M.S.24036 / 658416102) and is 100% interchangeable with Sandman MCM XL and TSC PF pump bearing housing seals. The seal is installed at the interface between bearing housing halves (split line) or between the housing and the rotating shaft. Its primary function is to retain lubricating oil or grease within the bearing cavity while preventing external abrasive slurry, dust, or moisture from contaminating the bearings.
Key Specifications
Material: High-quality elastomer (nitrile rubber / NBR, or Viton for high temperature)
Type: Static gasket (split line) or dynamic lip seal (shaft) – OEM configuration
Function: Oil retention and contaminant exclusion for bearing housing
Compatible with MECH. SEAL assemblies (24036 / 658416102)
Fits pump sizes: 8x6, 12x10, 14x12 (Mission Magnum XP series)
Material & Durability
Manufactured from oil-resistant, abrasion-resistant elastomers, the seal withstands temperature variation, vibration, and exposure to drilling fluids or slurry mist. It maintains flexibility and sealing pressure over extended service intervals.
Interchangeability
Direct replacement for Mission Magnum XP bearing housing seals (MECH. SEAL 24036 / 658416102)
Also fits Sandman MCM XL and TSC PF bearing housing grooves or split lines without modification
Same cross-section, length, and material durometer as OEM
Performance & Applications
The bearing housing seal is critical for maintaining a clean, lubricated bearing environment. Typical applications include:
Oil & gas hydraulic fracturing (frac pumps)
Mine dewatering and slurry transfer
Mineral processing pumps
Wastewater treatment pump maintenance
Why choose this bearing housing seal?
OEM fit for Mission Magnum XP / Sandman MCM XL / TSC PF (MECH. SEAL 24036 / 658416102)
Part numbers: 7496-272, 658408901
High-quality elastomer for long life
Prevents bearing contamination and oil loss
Reduces unplanned downtime
For technical drawings, material specs, or bulk orders:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.