Shaffer 13-5/8" Type 70 SL Soft Good Kit | 3-5M Seals

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the Shaffer Type 70 SL BOP seal range and its spare parts. The Soft Good Kit is designed for 13-5/8" 3-5M Type 70 SL BOPs, including all essential elastomer components for routine maintenance and overhauls.
Conatct For Details
DetailReview(0)Additional

HYRIG can supply the Shaffer Type 70 SL BOP seal range and its spare parts. The Soft Good Kit is designed for 13-5/8" 3-5M Type 70 SL BOPs, including all essential elastomer components for routine maintenance and overhauls.

Key Facts

  • Product Name: Shaffer Type 70 SL Soft Good Kit
  • BOP Size: 13-5/8"
  • Pressure Rating: 3,000 - 5,000 psi
  • Application: Complete elastomer overhaul
  • Material: NBR (Nitrile Rubber)

Key Specifications

ParameterDetail
Component TypeSoft Good Kit
Equipment TypeShaffer Type 70 SL Ram BOP
BOP Size13-5/8"
Working Pressure3,000 - 5,000 psi
MaterialNBR (Nitrile Rubber)
API StandardAPI 16A

Data source: Technical data table and official specifications.

Dimensions

ParameterDetail
Compatibility13-5/8" Type 70 SL BOP (3-5M)
ContentsVarious elastomer seals (Piston, Adapter, etc.)
WeightNot specified; confirm with supplier

Structure / Working Principle

A soft good kit is typically used during a major overhaul of the BOP. Over time, elastomers degrade due to pressure, temperature, and chemical exposure. This kit provides all the necessary O-rings and lip seals needed to rebuild the bonnet and ram assemblies, ensuring the BOP operates safely.

Cross-Reference & Replacement

When performing a complete overhaul using the Soft Good Kit, inspect the main structural components and the primary Ram Packers.

Related Components:

Selection Support

Not sure if this kit is right for your BOP? Provide your equipment model and serial number. HYRIG will confirm compatibility and ensure you get the correct elastomer kit.

Applications

Suitable for routine maintenance and major overhauls of 13-5/8" 3-5M Type 70 SL BOPs. Recommended when replacing the primary ram packers.

Spare Parts

HYRIG provides replacement soft good kits for Shaffer Type 70 SL BOPs.

Frequently Asked Questions

What is included in the Soft Good Kit?
This kit includes the essential elastomer seals required for the ram and bonnet assemblies in a 13-5/8" 3-5M Type 70 SL BOP.

Why is there no specific part number listed for this kit?
The kit part number may vary based on the exact BOP configuration. Please provide your serial number to HYRIG for the precise part number.

*Disclaimer: This equipment is designed for high-pressure and hazardous well control applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.*

Contact

HYRIG is a China-based manufacturer and global supplier of well control equipment and elastomer spare parts. We can supply the Shaffer 13-5/8" Type 70 SL Soft Good Kit. For selection support, contact HYRIG: info@hyrig.com

Page last updated: 2026-10-28

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit