HYRIG can supply the Shaffer Type 70 LWS BOP seal range and its spare parts. The Shaffer 30008 is a door gasket designed for 11" 5M Type 70 LWS BOPs, providing a critical barrier between the BOP body and the door assembly.
| Parameter | Detail |
|---|---|
| Part Number | 30008 |
| Component Type | Door Gasket |
| Equipment Type | Shaffer Type 70 LWS Ram BOP |
| BOP Size | 11" |
| Working Pressure | 5,000 psi |
| Material | NBR (Nitrile Rubber) |
Data source: Technical data table and official specifications.
| Parameter | Detail |
|---|---|
| Seal Type | Door Gasket |
| Assembly Position | Between BOP body and door |
| Weight | Not specified; confirm with supplier |
The door gasket sits in a groove on the BOP body or door. When the door is closed and bolted/latched, this gasket is compressed to prevent wellbore pressure from escaping. It is a critical soft good that should be inspected and replaced whenever the BOP door is opened for maintenance.
When replacing the 30008 door gasket, verify the part number against your equipment manual. It is recommended to inspect the ram packers at the same time.
Related Components:
Not sure if this gasket fits your door? Provide your BOP model and serial number. HYRIG will confirm the correct Shaffer part.
Suitable for Shaffer Type 70 LWS ram BOPs (11" 5M) during door maintenance or major overhauls.
HYRIG provides replacement door gaskets and ram packers for Shaffer Type 70 LWS BOPs.
What material is this gasket made of?
It is made of NBR (Nitrile Rubber) for standard service. HNBR is available for H2S or high-temp.
When should the door gasket be replaced?
It is best practice to replace it every time the BOP door is opened, or during major overhauls, to prevent pressure leaks.
*Disclaimer: This equipment is designed for high-pressure and hazardous well control applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.*
HYRIG is a China-based manufacturer and global supplier of well control equipment and elastomer spare parts. We can supply the Shaffer 30008 door gasket. For selection support, contact HYRIG: info@hyrig.com
Page last updated: 2026-10-28
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.