Shaffer 30106 Door Gasket | 11" 3M Type 70 LWS

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the Shaffer Type 70 LWS BOP seal range and its spare parts. The Shaffer 30106 is a door gasket designed for 11" 3M Type 70 LWS BOPs, providing a critical barrier between the BOP body and the door assembly.
Conatct For Details
DetailReview(0)Additional

HYRIG can supply the Shaffer Type 70 LWS BOP seal range and its spare parts. The Shaffer 30106 is a door gasket designed for 11" 3M Type 70 LWS BOPs, providing a critical barrier between the BOP body and the door assembly.

Key Facts

  • Product Name: Shaffer Type 70 LWS Door Gasket
  • Part Number: 30106
  • BOP Size: 11"
  • Pressure Rating: 3,000 psi (3M)
  • Material: NBR (Nitrile Rubber)

Key Specifications

ParameterDetail
Part Number30106
Component TypeDoor Gasket
Equipment TypeShaffer Type 70 LWS Ram BOP
BOP Size11"
Working Pressure3,000 psi
MaterialNBR (Nitrile Rubber)

Data source: Technical data table and official specifications.

Dimensions

ParameterDetail
Seal TypeDoor Gasket
Assembly PositionBetween BOP body and door
WeightNot specified; confirm with supplier

Structure / Working Principle

The door gasket sits in a groove on the BOP body or door. When the door is closed and bolted/latched, this gasket is compressed to prevent wellbore pressure from escaping. It is a critical soft good that should be inspected and replaced whenever the BOP door is opened for maintenance.

Cross-Reference & Replacement

When replacing the 30106 door gasket, verify the part number against your equipment manual. It is recommended to inspect the ram packers at the same time.

Related Components:

Selection Support

Not sure if this gasket fits your door? Provide your BOP model and serial number. HYRIG will confirm the correct Shaffer part.

Applications

Suitable for Shaffer Type 70 LWS ram BOPs (11" 3M) during door maintenance or major overhauls.

Spare Parts

HYRIG provides replacement door gaskets and ram packers for Shaffer Type 70 LWS BOPs.

Frequently Asked Questions

What material is this gasket made of?
It is made of NBR (Nitrile Rubber) for standard service. HNBR is available for H2S or high-temp.

When should the door gasket be replaced?
It is best practice to replace it every time the BOP door is opened, or during major overhauls, to prevent pressure leaks.

*Disclaimer: This equipment is designed for high-pressure and hazardous well control applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.*

Contact

HYRIG is a China-based manufacturer and global supplier of well control equipment and elastomer spare parts. We can supply the Shaffer 30106 door gasket. For selection support, contact HYRIG: info@hyrig.com

Page last updated: 2026-10-28

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit