Shaffer LWS Interchangeability & Selection Guide | HYRIG

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
How to verify and select interchangeable Shaffer LWS 11" 3M BOP parts: C.S.O. matching, H2S service limits, and OEM compatibility rules from HYRIG.
Conatct For Details
DetailReview(0)Additional

Key Facts

  • Scope: Compatibility standards for interchangeable Shaffer LWS 11" 3M parts
  • Sizing Rule: Always use C.S.O. (Closed Seal Opening) diameter, not nominal pipe OD
  • Sour Service: HNBR or NBR elastomer with NACE MR0175 certification
  • Metal Parts: Ram block must match LWS door geometry and locking mechanism
  • Standards: API 16A, NACE MR0175 / ISO 15156

Selection Rules

ConditionAction
Matching pipe size to packer sizeAlways use C.S.O. (Closed Seal Opening) diameter, not nominal pipe OD
Operating in sour gas (H2S) wellsSpecify HNBR or NBR elastomer with NACE MR0175 certification
Verifying metal part interchangeabilityEnsure the ram block matches the LWS door geometry and locking mechanism

Common field error: using a standard nitrile packer in temperatures exceeding 250°F (121°C) or in high H2S concentration leads to rapid seal degradation.

Quality Control

  • Dimensional Inspection: Dimensional inspection reports (DIR) provided with each batch
  • Standards: API 16A, NACE MR0175 / ISO 15156
  • Testing: Hydrostatic testing and material hardness verification

Related Pages

Contact

Email info@hyrig.com with your current BOP model and pressure rating, the C.S.O. size required, and H2S / CO2 concentration. HYRIG engineers will confirm interchangeability before quotation.

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit