HYRIG can supply the Shaffer 30 in 1,000 psi Spherical BOP and its spare parts. The Shaffer 30 in 1K is a large-bore spherical blowout preventer for land drilling, with 30 in bore and 1,000 psi working pressure.
| Parameter | 30 in 1K | 21 1/4 in 2K | 20 3/4 in 3K |
|---|---|---|---|
| Working Pressure | 1,000 psi | 2,000 psi | 3,000 psi |
| Outside Diameter | 71 in | 49 in | 54 1/8 in |
| Height | 65 5/8 in | 46 1/8 in | 48 7/16 in |
| Test Pressure | 2,000 psi | 4,000 psi | 6,000 psi |
| Total Weight | 28,750 lb | 10,850 lb | 14,600 lb |
| Hydraulic Connection | 2 in NPT (4) | 1 1/2 in NPT (2) | 1 1/2 in NPT (2) |
Data source: Technical data table.
| Dimension | Value |
|---|---|
| Bore Size | 30 in (762.0 mm) |
| Outside Diameter | 71 in (1,803 mm) |
| Flange Face to Face Height | 65 5/8 in (1,667 mm) |
| Total Weight | 28,750 lb (13,041 kg) |
| Element Weight | 2,875 lb (1,304 kg) |
| Piston Weight | 5,025 lb (2,279 kg) |
| Adapter Ring Weight | 1,050 lb (476 kg) |
| Upper Housing Weight | 6,575 lb (2,982 kg) |
| Lower Housing Weight | 9,850 lb (4,468 kg) |
| Hydraulic Port Size | 2 in NPT |
| Lifting Shackle Capacity | 100,000 lb total |
The 30 in 1K model uses a hollow piston subassembly with piston skirt and main body. Hydraulic pressure moves the piston to compress the sealing element. The spherical element seals on large casing or open hole. Do not heat, weld, or machine hollow pistons without Shaffer instructions because they may explode under improper heat.
When replacing an existing BOP with the Shaffer 30 in 1K, verify 30 in bore, 1,000 psi working pressure, 4 hydraulic ports 2 in NPT, and stack height 65 5/8 in. Confirm piston type before ordering spare parts.
The Shaffer 30 in 1K Spherical BOP is suitable for land drilling well control on large-bore wells, including closing on large casing and open hole. It seals on pipe, casing, or wireline.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Key replacement parts include Sealing Element Nitrile 155393, Natural 155392, and Seal Kit 155412. Contact HYRIG with the part number for availability and quotation.
Qty as per parts list; verify against original drawing.
Q: What is the operating pressure? A: 1,500 psi for normal operation.
Q: Which sealing elements are used? A: Nitrile 155393 or natural rubber 155392.
Q: Does the 30 in 1K use a hollow piston? A: Models manufactured after January 1982 may use a hollow piston. Do not heat, weld, or machine it without Shaffer instructions.
Q: What is the lead time? A: Contact HYRIG for current availability.
Tell us your large-bore casing size and pressure requirements, and HYRIG engineers will confirm the correct 30 in model and spare parts. Explore related models: Shaffer 21 1/4 in 2K Spherical BOP or view the Shaffer Spherical BOP series.
For Shaffer 30 in 1K Spherical BOP selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.