Our API 610 slop oil pumps are heavy‑duty centrifugal pumps engineered specifically for the reliable recovery and transfer of slop oil containing volatile light hydrocarbons – including naphtha, liquefied petroleum gas (LPG) mixtures (propane, butane, and their blends), and other light ends – from collection sumps, tank bottoms, drain pits, spill basins, and process drainage systems in refineries, product terminals, petrochemical plants, and gas processing facilities. This slop oil stream is a volatile mixture of light hydrocarbons, water, emulsions, and trace solids, characterised by high vapour pressure, low viscosity, high volatility, low Net Positive Suction Head (NPSH) availability, and significant environmental and safety risks due to flammability and VOC emissions. Pumps for this service demand excellent sealing integrity to prevent fugitive emissions, reliable low‑NPSH performance, and robust construction to handle variable fluid composition and intermittent operation. Manufactured in strict compliance with the latest edition of API 610 (ISO 13709), these pumps are designed for continuous, safe, and efficient operation. The API 610 standard provides three primary configurations – VS (Vertically Suspended), BB (Between Bearings), and OH (Overhung) – with the VS type being the preferred solution for deep sump and low‑NPSH applications.
API 610 Classifications for Slop Oil Duties
VS – Vertically Suspended Pumps (Preferred for Sump & Low‑NPSH Recovery)
For pumping volatile slop oil from deep sumps, collection pits, and underground tanks with limited NPSH, VS1 (vertical turbine) and VS4 (vertical sump) types are the standard and preferred solution. The first‑stage impeller is submerged below the minimum liquid level, ensuring excellent NPSH performance and eliminating priming issues – critical when handling volatile, high‑vapour‑pressure fluids. Long column lengths are available for deep sumps. Open or semi‑open impeller designs handle emulsions and trace solids without clogging. The vertical configuration saves valuable plot space and reduces fugitive emission risks.
BB – Between Bearings Pumps
For high‑capacity slop oil transfer from sumps to treatment, storage, or recovery systems, BB pumps provide superior rotor stability and long‑term reliability. BB2 (radially split, single‑stage) and BB3/BB4 (multistage) configurations are specified for flows exceeding 500 m³/h and heads up to 250 metres. The between‑bearings arrangement minimises shaft deflection, extending seal and bearing life.
OH – Overhung Pumps
For smaller slop oil recovery applications, transfer from shallow sumps, or recirculation duties, OH pumps offer a compact and economical solution. The OH2 (horizontal, centreline‑mounted) and OH3 (vertical inline) subtypes are suitable for small‑scale recovery, maintenance drains, and emergency transfer. Centreline mounting accommodates thermal expansion.
Key Performance & Design Features
Flow Range – Capacities from 5 m³/h to 2,500 m³/h, covering all slop oil recovery requirements.
Head Range – Up to 300 metres for high‑head transfer to treatment or storage.
Temperature Range – Designed for volatile slop oil from -40°C to 80°C (-40°F to 176°F), with low‑temperature impact‑tested materials.
Solids Handling – Open or semi‑open impellers with large clearances to pass suspended particles, debris, and sludge without clogging.
NPSH Performance – VS pumps with submerged impellers deliver extremely low NPSH requirements (<1 metre), eliminating cavitation risk with volatile hydrocarbons.
Vapour Pressure Handling – Pumps designed to handle high vapour pressure light hydrocarbon slop with minimal vapour locking.
Materials – Wetted parts in low‑temperature carbon steel (LTCS, ASTM A352 LCB/LCC), stainless steels (304L, 316L, duplex), and corrosion‑resistant alloys. Full NACE MR0175/ISO 15156 compliance available for sour service.
Sealing – API 682 mechanical seals – dual (tandem or pressurised) seals are mandatory for volatile slop oil service to prevent VOC emissions and fugitive leakage. Suitable flush plans (Plan 11, 13, 32, 53A/B, 62) with cooling and quench to maintain seal integrity. Vapour‑tight construction and emissions monitoring available.
Casing Design – Robust casings with replaceable wear plates and liners; vapour‑tight covers and vent connections to prevent air ingress and VOC release.
Bearing & Lubrication – Heavy‑duty bearings (product‑lubricated for VS, oil‑lubricated for BB/OH) with temperature and vibration monitoring for reliable long‑term operation.
Anti‑Air Lock – Automatic venting and degassing features to handle gas entrainment and volatile hydrocarbon flashing.
Typical Applications
Naphtha and LPG slop recovery from refinery collection sumps
Light hydrocarbon slop pumping from product terminal drainage systems
Transfer of volatile slop from spill basins and containment pits
Recovery of naphtha/LPG mixtures from process drains and floor drains
Pumping from collection pits during product changeovers
Transfer to oil‑water separation and recovery units
Industries Served
Oil refineries (light hydrocarbon slop recovery systems)
Product terminals and storage facilities (naphtha/LPG handling)
Petrochemical plants (light hydrocarbon drainage)
Natural gas processing (condensate and LPG slop)
Tank cleaning service providers
Environmental remediation and spill response operations
Why Choose Our Slop Oil Pumps?
With extensive experience in volatile hydrocarbon handling and full API 610 compliance, we design and manufacture slop oil pumps that deliver unmatched safety, reliability, and environmental protection. Every pump undergoes rigorous performance testing, hydrostatic testing, and comprehensive NDT inspections (radiographic, ultrasonic, dye penetrant) with complete documentation to meet the most stringent international specifications. We offer customised column lengths, materials, impeller designs, and seal systems to match your specific slop oil composition, vapour pressure, and operating conditions. Our engineering support includes NPSH analysis, vapour pressure evaluation, emissions control advisory, and API 684 rotor dynamics to ensure safe, long‑term, trouble‑free operation.
Contact Us
For technical datasheets, selection assistance, or a project‑specific quotation, please contact us at:
info@hyrig.com
Rely on our API 610 slop oil pumps to safely and efficiently recover volatile naphtha and LPG slop from your critical waste streams.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.