Switchable Casing Scraper | Fixed & Rotating in One Tool | BOWEN Alternative

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply a compatible replacement for BOWEN casing scrapers with our Switchable Fixed/Rotating Casing Scraper. This dual-mode tool is designed to work as a standard fixed scraper or a rotating scraper by simply adjusting the shims on the top sub, providing ultimate flexibility for varying well conditions without needing two separate tools.

BOWEN ® is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
Conatct For Details
DetailReview(0)Additional

Key Facts

  • Dual-Mode Design: Switch between fixed and rotating
  • Activation: Add/remove adjustable pads on top sub
  • Casing Size Range: 4-1/2" to 13-3/8"
  • Blade Configuration: 2 rows (e.g., 2×5 blades for 9-5/8")
  • Application: Ideal for deviated wells or varying cement conditions
  • Documentation: COC and COO included

Switchable Casing Scraper Specifications & Model Comparison

ModelTool OD mm (inch)Tool ID mm (inch)OAL mm (ft)Casing Size inchCasing Weight lb/ftConnection
4-1/285.7 (3-3/8)16 (5/8)1050 (3.4)4-1/29.5 ~ 15.12-3/8 REG B × P
585.7 (3-3/8)19 (3/4)1050 (3.4)511.5 ~ 24.12-3/8 REG B × P
5-1/2100 (3-15/16)19 (3/4)1070 (3.5)5-1/214 ~ 232-7/8 REG B × P
7121 (4-3/4)31.8 (1-1/4)1160 (3.8)720 ~ 42.7NC38 B × P
9-5/8165.1 (6-1/2)71.4 (2-13/16)1240 (4.1)9-5/832.3 ~ 75.6NC50 B × P
13-3/8203.2 (8)71.4 (2-13/16)1562 (5.1)13-3/848 ~ 726-5/8 REG B × P

Data source: Technical data table.

Dimensions

  • Adjustable Pad: Located on the top sub for mode switching
  • Fishing Neck: Both ends feature a suitable fishing neck
  • Weight: Varies by model (approx. 1050mm to 1562mm OAL)

Structure / Working Principle

The core feature is the adjustable pad (shim) on the top sub. By increasing the pad thickness, the tool locks and acts as a non-rotating fixed scraper. By decreasing the pad, it becomes a rotating scraper. This allows operators to adapt to downhole conditions on the fly. The blades are spring-loaded and feature a long taper to pass through casing couplings without hanging.

Applications

  • If vertical well with heavy cement → Then configure as Rotating Scraper.
  • If horizontal or highly deviated well → Then configure as Fixed Scraper to reduce casing wear.
  • If thin-wall casing → Then use Fixed Mode to prevent damage.
  • If uncertain about well conditions → Then keep the tool Switchable for maximum flexibility.

Disclaimer: Please follow standard industrial safety procedures during installation and maintenance.

Cross-Reference & Replacement

Looking to replace a standard BOWEN fixed scraper with a more flexible option? Here is what to check:

  1. Well Trajectory: If you have horizontal sections, a rotating scraper can cause excessive casing wear; the switchable design solves this.
  2. Pad Adjustment: Confirm your operators understand how to adjust the shims on the top sub.

Selection Support

Not sure which mode to run? Tell us your well trajectory and casing weight, and our engineers will provide the recommended setting.

Compatible Host Models

This tool serves as an alternative to BOWEN Full-Circle designs where varying well conditions require both rotating and fixed scraping actions. Explore our Spring-Type Casing Scraper for standard fixed operations.

Contact

For Switchable Casing Scraper selection and spare parts, contact HYRIG: info@hyrig.com

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit