Swivel Series | SL Models for Drilling Rigs
Overview:
HYRIG can supply the complete swivel series and their spare parts. This range includes SL models with load capacities from 1,350 kN to 6,750 kN, designed to suspend the drill string and allow rotation while circulating high-pressure drilling fluid.
| Model | Max Static Load (kN) | Max Speed (r/min) | Max Working Pressure (MPa) | Bore Diameter of Stem (mm) |
|---|---|---|---|---|
| SL135 | 1,350 | 300 | 35 | 64 |
| SL225 | 2,250 | 300 | 35 | 75 |
| SL450 | 4,500 | 300 | 35 | 75 |
| SL450 (Enforced) | 4,500 | 300 | 52 | 75 |
| SL675 | 6,750 | 300 | 52 | 101.6 |
Data source: Technical data table.
The overall dimensions vary by model. The swivel bail and gooseneck clearance is critical for matching with the traveling block and rotary hose.
The swivel consists of a stationary body and a rotating stem. Drilling fluid enters through the gooseneck and passes through the wash pipe into the rotating stem, which connects to the kelly or top drive. The main bearing handles the entire weight of the drill string.
Selecting the correct swivel requires matching the load capacity and thread connections.
Tell us your hook load and mud pressure, and our engineers will assist.
Used in the rotating system of drilling rigs to suspend the drill string and provide a pathway for high-pressure drilling mud.
Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.
We supply replacement parts including wash pipes, packings, bearings, and goosenecks. Please visit our Hoisting and Rotating System Parts page.
Specifications:
FAQ:
Contact Us:
For swivel selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.