Product Name: Tool, Impeller Removal (Impeller Puller / Extractor)
Part Numbers: 24041 | 658420252
This special service tool is designed for Mission Magnum XP series pumps (M.S.24036 / 658416102) and is 100% interchangeable with Sandman MCM XL and TSC PF pump impeller removal tools. The tool is used to safely extract the impeller from the pump shaft – typically after removing the impeller nut and nose. It provides even, controlled pulling force to break the impeller free from the shaft taper or key without damaging shaft threads, the mechanical seal, bearings, or the impeller itself.
Key Specifications
Type: Mechanical puller or extractor (may include threaded rods, a forcing screw, and a yoke/plate)
Material: High-strength alloy steel, heat‑treated for durability
Fitment: Specific to 8x6, 12x10, 14x12 Mission Magnum XP pumps
Function: Applies axial force to remove impeller from shaft; protects shaft end and threads
Compatible with MECH. SEAL assemblies (24036 / 658416102)
Fits pump sizes: 8x6, 12x10, 14x12 (Mission Magnum XP series)
Material & Durability
Manufactured from hardened steel to resist deformation under high pulling loads. The tool is designed for repeated industrial use and will not mar shaft surfaces or impeller bores.
Interchangeability
Direct replacement for Mission Magnum XP impeller removal tool (MECH. SEAL 24036 / 658416102)
Also fits Sandman MCM XL and TSC PF impeller/shaft configurations without modification
Same thread sizes, pulling plate geometry, and load capacity as OEM
Performance & Applications
This tool is essential for any major pump maintenance, especially when:
Replacing a worn impeller (e.g., 25292-T0-30)
Servicing the mechanical seal (e.g., 24036 / 658416102)
Overhauling the pump bearing assembly
Avoiding damage to costly parts: shaft, impeller, seal, bearings
Oil & gas hydraulic fracturing (frac pumps)
Mine dewatering and slurry transfer
Mineral processing pumps
Why choose this tool?
OEM fit for Mission Magnum XP / Sandman MCM XL / TSC PF (MECH. SEAL 24036 / 658416102)
Part numbers: 24041, 658420252
Prevents costly damage to impeller, shaft, and seals
Enables efficient, one‑person operation
Reduces overhaul time and unplanned downtime
For technical drawings, operation instructions, or bulk orders:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.