When performing artificial lift (ESP) operations or working with eccentric tubulars, standard pipe rams cannot provide a pressure-tight seal. HYRIG manufactures specialized sealing elements for the 7 1/16" Townsend Manual BOP to safely seal around electrical submersible pump cables and non-standard pipe geometries.
| Ram Size | Cable Size | Profile | Packer P/N |
|---|---|---|---|
| 2 3/8" | #6 Cable | Round | 223051-RR6 |
| 2 3/8" | #6 Cable | Flat | 223051-FR6 |
| 2 3/8" | #4 Cable | Round | 223051-RR4 |
| 2 3/8" | #4 Cable | Flat | 223051-FR4 |
| 2 3/8" | #2 Cable | Round | 223051-RR2 |
| 2 3/8" | #2 Cable | Flat | 223051-FR2 |
| 2 7/8" | #6 Cable | Round | 223053-RR6 |
| 2 7/8" | #6 Cable | Flat | 223053-FR6 |
| 2 7/8" | #4 Cable | Round | 223053-RR4 |
| 2 7/8" | #4 Cable | Flat | 223053-FR4 |
| 2 7/8" | #2 Cable | Round | 223053-RR2 |
| 2 7/8" | #2 Cable | Flat | 223053-FR2 |
| Pipe Range | Packer P/N |
|---|---|
| 2 3/8" - 2 7/8" | 223053 |
| 2 7/8" - 3 1/2" | 223054 |
For extreme pressure differentials or when sealing around irregular cable geometries, standard top seals can experience elastomer extrusion. We recommend upgrading to the High Crown Top Seal for enhanced containment. (P/N 224023HC)
If your tubing is not centered in the BOP bore, standard concentric packers will fail. HYRIG custom-manufactures Offset Packers specifically for the 7 1/16" Townsend Manual BOP. Please provide your Tubing OD, Eccentricity / Offset distance, and required quantity.
| Situation | Recommendation |
|---|---|
| You are running a flat ESP cable | Select the FR series (e.g., 223051-FR4). |
| You are running a round ESP cable | Select the RR series (e.g., 223053-RR6). |
| Your pipe size changes during operations | Use the Flex Packers to accommodate variable ranges. |
| The tubing is off-center | Custom Offset Packers are required to achieve a proper seal. |
Common field error: Attempting to force a standard round packer around a flat ESP cable, or using the incorrect cable size (e.g., #4 packer on a #6 cable). This results in severe rubber extrusion and loss of well control.
Email info@hyrig.com with:
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.