HYRIG can supply the TSC HCP series centrifugal pumps range and its spare parts. The TSC HCP centrifugal pump parts page lists key replacement components for this solid control equipment.
| Part Name | Part No. | Qty | Remarks |
|---|---|---|---|
| Casing 8x6x14 | TS-19117-01-30A | 1 | |
| Casing 8x6x11 | TS-19763-01-30A | 1 | |
| Casing 6x5x14 | TS-19123-01-30A | 1 | |
| Casing 6x5x11 | TS-19122-01-30A | 1 | |
| Casing 5x4x14 | TS-19222-01-30A | 1 | |
| Casing 4x3x13 | TS-19205-01-30A | 1 | |
| Casing 3x2x13 | TS-19203-01-30A | 1 | |
| Impeller 8x6x14 | TS-19116-XX-30 | 1 | XX denotes impeller dia code |
| Impeller 8x6x11 | TS-19121-XX-30 | 1 | |
| Impeller 6x5x14 | TS-19121-XX-30 | 1 | |
| Impeller 6x5x11 | TS-19121-XX-30 | 1 | |
| Impeller 5x4x14 | TS-19224-XX-30 | 1 | |
| Impeller 4x3x13 | TS-19206-XX-30 | 1 | |
| Impeller 3x2x13 | TS-19204-XX-30 | 1 | |
| Mechanical Seal | TS-22451-1 | 1 | |
| Shaft Sleeve (M.S.) | TS-20943-21 | 1 | For mechanical seal |
| Shaft Sleeve (Packing) | TS-20613-21G-7A | 1 | For packing seal |
| Packing | TS-25014-04M-B | 1 | |
| Bearing (Inboard) | TS-661009010 | 1 | |
| Bearing (Outboard) | TS-648408201S | 1 | |
| Oil Seal (Inboard) | TS-20619-01 | 1 | |
| Oil Seal (Outboard) | TS-20619-02 | 1 | |
| Gland Assembly | TS-20622A | 1 | Packing gland |
| Coupling (Large) | TS-250CP-01 | 1 | |
| Coupling (Small) | TS-250CP-02 | 1 | |
| Coupling Rubber Block | TS-250CP-01A | 1 | Large |
| Coupling Rubber Block | TS-250CP-02A | 1 | Small |
Qty as per parts list; verify against original drawing.
Mechanical seal for HCP series, part no. TS-22451-1. Used as the primary shaft seal. The packing is auxiliary and should only be tightened after the mechanical seal fails.
Impeller for HCP8x6x14, part no. TS-19116-XX-30. The "XX" in the part number denotes the specific impeller diameter code. Please provide the pump model and motor power when ordering.
Pump casing for HCP8x6x14, part no. TS-19117-01-30A. Made from wear-resistant alloy cast iron.
For TSC HCP centrifugal pump spare parts, contact HYRIG: info@hyrig.com