The UNB600 mud pump is a 600 kW duplex double-acting piston pump widely used in Russian and CIS oil and gas drilling operations. It features 2 double-acting pistons, a piston stroke of 400mm, maximum double stroke frequency of 65 SPM, maximum flow rate of 52 L/s, and maximum discharge pressure of 25 MPa. The pump complies with GOST 6031 in basic parameters and is designed to supply drilling fluid to the bottomhole when drilling wells up to 5,000m deep. Our UNB600 mud pump parts and spares are manufactured to API 7K and GOST standards.
Easy Wearing Parts for UNB600 with OEM Part Numbers:
Cylinder Liners:
Liner 180mm — P/N: 4045.53.501-02
Liner 170mm — P/N: 4045.53.501-03
Liner 160mm — P/N: 4045.53.501-04
Liner 150mm — P/N: 4045.53.501-05
Liner 140mm — P/N: 4045.53.501-06
Liner 130mm — P/N: 4045.53.501-07
Liner D120mm — P/N: 4066.53.501-08
Liner Ø190 — P/N: 4066.53.501-01
Bi-metal liner — high-chrome inner sleeve (27% Cr), forged steel outer sleeve. Surface hardness 58–62 HRC. Service life 800–1200 hours
Ceramic liner — ZTA ceramic inner sleeve, extended service life
Pistons and Rubber:
Piston 180mm — P/N: 4045.53.237
Piston 170mm — P/N: 4045.53.235
Piston 160mm — P/N: 4045.53.236
Piston 150mm — P/N: available
Piston 140mm — P/N: 4045.53.233
Piston 130mm — P/N: 4045.53.230
Cast piston Ø120 — P/N: 4066.53.240
Piston — high-strength steel core with alloy steel hub. Piston cup material: rubber or polyurethane. Temperature range: −40°C to +120°C. Pressure rating: up to 25 MPa
Bonded urethane piston — solid bonded piston for harsh environments
Valve Assembly and Components:
Valve K9 assembly — P/N: 4066.53.610СБ
Valve K-9 with seats — P/N: 14023.53.090-2
Valve plate — P/N: 4066.53.615
Valve assembly — complete valve unit with valve body, valve rubber, valve seat, guide frame, gland, circlip, and steel ball. Material: forged alloy steel. Hardness: 50–55 HRC. Surface treatment: tungsten carbide coating
Valve seat — alloy steel with tungsten carbide overlay. Hardness: 60–65 HRC. Pressure capacity: up to 25 MPa
Valve spring — P/N: 4066.53.619
Valve cover seal ring — oil-resistant NBR or HNBR seal
Seals and Gaskets:
Piston rod seal M-70 — P/N: 4066.53.53
Piston rod ШП-70 with nuts — P/N: 4066.53.520-СБ
Diaphragm D-70 — P/N: 4045.53.230
Liner seal — high-performance sealing element for liner assembly
Valve cover seal — high-performance sealing element
Rods and Related:
Piston rod — forged steel rod for reliable power transmission
Piston rod clamp — secure connection between piston and rod
Power End Components:
Transmission shaft — P/N: 4066.53.850СБ
Crank-slider mechanism — P/N: 4066.53.510СБ
Frame — P/N: 4066.53.130СБ
Hydraulic block — P/N: 4066.53.700СБ
Pneumatic compensator — P/N: 14020.53.130СБ
Materials and Construction:
Each UNB600 part is made from materials selected for demanding oilfield service. Liners use 45# forged steel and 27% high-chromium cast iron, or ZTA ceramic for extended life. Pistons use alloy steel cores with heat treatment. Piston rubbers use HNBR or polyurethane. Valves and seats use forged alloy steel with tungsten carbide coating. Seals use NBR or HNBR rubber. All parts are precision machined to ensure proper fit and reliable performance.
Key Performance Advantages:
Our UNB600 mud pump parts and spares offer high wear resistance, reliable sealing, and long service life. The pump is designed for drilling wells up to 5,000m deep and complies with GOST 6031 standards. Parts are compatible with water-based, oil-based, and synthetic drilling fluids.
Applications:
These parts are suitable for oil and gas drilling, water well drilling, geothermal exploration, and coalfield exploration, particularly in Russian and CIS drilling operations.
Compatibility:
All listed parts are direct replacements for UNB600 mud pump components. They fit standard UNB600 fluid ends, valve assemblies, and power end connections. No modification is required for installation.
Order Information:
MOQ: 5 pieces or sets, depending on the part. Custom materials, colors, and branding available. Standard export packaging. Delivery from stock or short lead time. For pricing, technical data sheets, or OEM inquiries, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.