OEM Interchangeable, 5-10x Longer Life Than Bimetal Liners – For UNBT1180L High-Pressure Drilling
Product Overview
As the core fluid-end component of UNBT1180L triplex mud pumps – a reliable model for global oilfield and industrial pumping – our ceramic cylinder liner is exclusively engineered for UNBT1180L mud pumps. The liner adopts a high-performance composite structure: a forged 45# carbon steel (AISI 1045) outer shell combined with a ZTA (Zirconia Toughened Alumina) ceramic inner sleeve. This design delivers unmatched wear resistance, corrosion protection, and pressure tolerance. Fully compliant with API 7K standards and precision-machined to UNBT1180L original dimensions, each liner is 100% interchangeable with OEM parts. It is ideal for onshore and offshore drilling, deep well operations (2000-4000m), high-pressure industrial pumping, and extreme abrasive mud environments.
Core Specifications
| Parameter | Detail |
|---|---|
| Material | Outer: Forged 45# Carbon Steel (AISI 1045); Inner: ZTA Ceramic (Zirconia Toughened Alumina) |
| Ceramic Hardness | 92 – 94 HRC |
| Steel Shell Hardness | HB 180 – 220 |
| Working Pressure | 51.7 MPa (7500 PSI) – matched to UNBT1180L rating |
| Service Life | 7000 – 12000+ operating hours (5-10x longer than bimetal/high-chrome liners) |
| Surface Finish | Mirror honing (4-8 RMS / Ra ≤ 0.4μm) |
| Certifications | API 7K, ISO 9001 |
| Bore Sizes | 140 – 190 mm (compliant with GB/T 2348-1993 cylinder bore standards) |
| Assembly | Hot-press interference fit + shoulder-locking design (anti-slippage) |
| MOQ | 3 pieces |
| Lead Time | 5 – 15 working days (large inventory for UNBT1180L) |
| Payment | T/T, L/C, Western Union, Alibaba Trade Assurance |
Model-Specific Matching Guide
UNBT1180L ceramic liner – 880 kW / 1180HP, max 51.7 MPa (7500 PSI). Recommended bores: 140mm, 150mm, 160mm, 170mm, 180mm, 190mm. Stroke: 305mm (12") (compliant with GB/T 2349-1980 stroke series). Ideal for deep well drilling (2000-4000m), onshore large-scale oil and gas drilling, high-displacement mud circulation, high-pressure corrosive formation drilling, and industrial slurry pumping. Service life: 10000-12000+ hours – up to 10x longer than bimetal liners.
Key Advantages
Pressure-Grade Precision for UNBT1180L’s Design – The ZTA ceramic inner sleeve is engineered to match UNBT1180L’s 7500 PSI (51.7 MPa) high-pressure requirement, aligning with mid-to-large power mud pump pressure standards. It offers superior toughness compared to pure alumina ceramic – resisting abrasive solids (up to 21% in drilling fluids) and corrosive media (chloride, sulfide), eliminating scratches and pitting even in long-term cyclic pressure loads, which is critical for deep well drilling stability.
OEM Interchangeability & Precision Machining – Precision machined to ±0.025mm dimensional tolerance, our liner is 100% interchangeable with UNBT1180L original parts. Each liner passes a 1.5x rated pressure hydrostatic test (3 minutes, no leakage). Fully compatible with UNBT1180L’s fluid end structure, maintaining stable performance in drilling and industrial environments. Bore size and stroke strictly follow national design standards (GB/T 2348-1993, GB/T 2349-1980), ensuring a perfect fit without modification. ISO 9001 certified manufacturing ensures consistent quality.
Extended Longevity for Cost-Efficient Operations – Service life reaches up to 12000+ hours – 10x longer than bimetal liners, critical for reducing downtime in high-cost deep well projects. The durable ZTA ceramic material minimizes replacement frequency, cutting maintenance costs by over 45% compared to traditional liners, directly improving project efficiency and profitability.
High-Strength Structure for Extreme Conditions – The forged 45# steel shell (tensile strength ≥610 MPa) resists fatigue under 51.7 MPa (7500 PSI) peak pressure. The permanent metallurgical bond between steel and ceramic prevents any relative movement or leakage – even in high-temperature (up to 120°C) drilling fluid environments, perfectly adapting to UNBT1180L’s rugged working scenarios (e.g., high-sand-content formations).
Targeted Supply for UNBT1180L Users – We stock UNBT1180L ceramic liners in full bore sizes (140-190mm) for fast delivery. Custom dimensions are supported based on specific requirements. Trial orders (MOQ only 3 pieces) are accepted – ideal for buyers maintaining UNBT1180L mud pumps, allowing on-site compatibility verification.
Application Scenarios
Deep well drilling (2000-4000m)
Onshore large-scale oil and gas drilling
High-displacement mud circulation systems
High-pressure corrosive formation drilling
Industrial high-pressure slurry pumping
UNBT1180L mud pump maintenance and overhaul
Installation & Maintenance Tips
Handle with soft padding – avoid dropping or impacting the ceramic sleeve (critical for maintaining high-pressure sealing precision of UNBT1180L’s 7500 PSI design).
Ensure piston-liner alignment (clearance 0.05-0.1mm) to prevent eccentric wear – key for UNBT1180L’s 305mm stroke design, which directly affects flow control accuracy.
Drain mud completely when idle below 0°C to prevent freezing and ceramic cracking – applicable for cold-region onshore drilling.
Use wooden blocks for adjustments – never strike the liner with metal tools, as this protects the ceramic inner sleeve and UNBT1180L’s precision fluid end structure.
Confirm bore size matching with UNBT1180L’s fluid end requirements before installation (no additional modification needed for direct replacement).
Packaging & Shipping
Inner Package: Anti-rust oil + vacuum-sealed plastic bag + shock-absorbing foam
Outer Package: Reinforced wooden case (customized for sea or air freight, anti-collision design)
Shipping Terms: FOB, CIF, EXW (DHL, FedEx, UPS for express; sea shipping for bulk orders)
Port of Loading: Shanghai, Qingdao, Tianjin, China
Special Note: For high-value UNBT1180L orders, optional insurance coverage for transportation damage is available.
FAQ
Q: Are your liners compatible with UNBT1180L’s high-pressure design?
A: 100% compatible. Engineered to withstand 51.7 MPa (7500 PSI) peak pressure, precision machined to UNBT1180L’s original dimensions (305mm stroke). Direct replacement, no modification needed for high-pressure operations. Bore sizes comply with GB/T 2348-1993 standards for a perfect fit.
Q: Do you have UNBT1180L ceramic liners in stock?
A: Yes. UNBT1180L ceramic liners are kept in large inventory with full bore sizes (140-190mm) – lead time 5-7 days, supporting urgent maintenance needs for deep well and industrial projects.
Q: Can I order a trial for UNBT1180L?
A: Yes. MOQ is 3 pieces, and trial orders are welcome to test compatibility and performance in your UNBT1180L mud pumps.
Q: What certifications do you provide?
A: API 7K and ISO 9001. Full test reports (including 7500 PSI pressure resistance and wear resistance data) and certification copies are available upon request, compliant with global oilfield and industrial equipment standards.
Q: Do you support custom bore sizes for UNBT1180L?
A: Yes. Custom bore sizes and lengths are supported based on your drawings or samples.
Contact Us Now for a Quote or Compatibility Verification
Email: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.