UNBT1180L Mud Pump Parts and Spares — Easy Wearing Parts

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
API 7K UNBT1180L mud pump parts and spares. Easy wearing parts include bi-metal liners, ceramic liners, pistons, piston rubbers, valve assemblies, valve seats, valve springs, valve cover seals, and piston rods. 1180 kW rated power, 35.6 MPa max working pressure, 5160 PSI. Contact info@hyrig.com.

Conatct For Details
DetailReview(0)Additional

The UNBT1180L mud pump is a 1,180 kW (1,600 HP) triplex single-acting piston pump widely used in Russian and CIS oil and gas drilling operations. It features 3 cylinders, a piston stroke of 290mm (11.42 in.), maximum flow rate of 51.4 L/s (814.7 GPM), and maximum working pressure of 35.6 MPa (5,160 PSI). The pump is a direct replacement for original UNBT-1180L pumps used in CIS and Russian drilling rigs, with fully interchangeable parts including liners, pistons, valves, and crankshaft components. Our UNBT1180L mud pump parts and spares are manufactured to API 7K and GOST standards.

Easy Wearing Parts for UNBT1180L with OEM Part Numbers:

Cylinder Liners:

Bi-metal liner — high-chrome inner sleeve (27% Cr), forged steel outer sleeve. Surface hardness 58–62 HRC. Service life 800–1200 hours. Bore sizes: 130mm to 190mm

Ceramic liner — ZTA ceramic inner sleeve, API 7K certified. Hardness 92–94 HRC, service life 3500–10000+ hours. Working pressure 3500–7500 PSI

Liner 140mm — P/N: 44040.53.034-05СБ

Liner 170mm — P/N: 44040.53.034-02СБ

Pistons and Rubber:

Piston — high-strength steel core with alloy steel hub. Piston cup material: rubber or polyurethane. Temperature range: −40°C to +120°C. Pressure rating: up to 35 MPa

Piston rubber — premium HNBR or polyurethane cup

Bonded urethane piston — solid bonded piston for harsh environments

6" Urethane Bonded Piston (Orange) — P/N: LLU60B15 (compatible with UNBT-950L, UNBT-1180, UNBT-1180L)

Piston sizes available: 130mm, 140mm, 150mm, 160mm, 170mm, 180mm

Valve Assembly and Components:

Valve assembly API 7 — complete valve unit with valve body, valve rubber, valve seat, guide frame, gland, circlip, and steel ball. Material: forged alloy steel. Hardness: 50–55 HRC. Surface treatment: tungsten carbide coating

Valve seat — alloy steel with tungsten carbide overlay. Hardness: 60–65 HRC. Pressure capacity: up to 35 MPa. Finish: Ra 0.4µm (mirror) for tight seal

Valve spring — high-strength spring steel, heat treated

Valve cover seal ring — oil-resistant NBR or HNBR seal

Valve assembly — P/N: 36001 (compatible with UNBT1180 and UNBT950)

Seals and Gaskets:

Liner seal — high-performance sealing element for liner assembly

Valve cover seal — high-performance sealing element

O-Ring Seal 200×7 — P/N: 530301012000070007 (compatible with UNBT-950, UNBT-1180L, UNB-600, 8T650)

Rods and Related:

Piston rod — forged steel rod for reliable power transmission

Piston rod clamp — secure connection between piston and rod

Power End Components:

Crank-slider mechanism — P/N: 66086.53.105 СБ

Transmission shaft — P/N: 66086.53.105 СБ

Frame — P/N: УНБТ 01.03.00.000 СБ

Hydraulic block — P/N: УНБТ 01.06.00.000 СБ

Pneumatic compensator PC 70-350 — P/N: 96074.53.925 СБ

Pulley Ø 710 — P/N: 96090.53.725 СБ

Pulley Ø 800 — P/N: 96074.53.020 СБ

Pulley Ø 1000 — P/N: 96074.53.078 СБ

Materials and Construction:

Each UNBT1180L part is made from materials selected for demanding oilfield service. Liners use 45# forged steel and 27% high-chromium cast iron, or ZTA ceramic for extended life. Pistons use alloy steel cores with heat treatment. Piston rubbers use HNBR or polyurethane. Valves and seats use forged alloy steel with tungsten carbide coating. Seals use NBR or HNBR rubber. All parts are precision machined to ensure proper fit and reliable performance.

Key Performance Advantages:

Our UNBT1180L mud pump parts and spares offer high wear resistance, reliable sealing, and long service life. The pump is rated at 1180 kW with a maximum working pressure of 35.6 MPa (5160 PSI) and a flow rate of up to 185 m³/h, delivering consistent power for drilling operations up to 7000m deep. Parts are compatible with water-based, oil-based, and synthetic drilling fluids.

Applications:

These parts are suitable for oil and gas well drilling (up to 7000m depth), geological exploration and mining dewatering, coalbed methane and shale gas projects, well service and workover operations, and drilling rig retrofitting in CIS countries.

Compatibility:

All listed parts are direct replacements for UNBT1180L mud pump components. They are fully interchangeable with original Russian UNBT-1180L mud pumps, including liners, pistons, valves, and crankshaft components. No modification is required for installation.

Order Information:

MOQ: 5 pieces or sets, depending on the part. Custom materials, colors, and branding available. Standard export packaging. Delivery from stock or short lead time. For pricing, technical data sheets, or OEM inquiries, please contact us at info@hyrig.com.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit