Upper IBOP for BPM DQ70BSC Top Drive System

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The Upper Internal Blowout Preventer (Upper IBOP) is a remotely operated hydraulic ball valve with 197mm inner diameter, 105MPa (15,000 psi) rated pressure, metal-to-metal floating ball seal, wave spring preloading, 6-5/8 REG connection, and API Spec 7-1 compliance – suitable for all models of top drive systems requiring remote emergency well control functionality.
Conatct For Details
DetailReview(0)Additional

Upper Internal Blowout Preventer (Upper IBOP) for BPM DQ70BSC Top Drive System

The Upper Internal Blowout Preventer (Upper IBOP) for the BPM DQ70BSC Top Drive System is a core well control component of the top drive, typically configured as a remotely operated hydraulic ball valve (also referred to as Remotely Operated IBOP).


I. Core Information

ParameterDescription
Installation PositionConnected to the lower end of the top drive’s power swivel main shaft, above the Lower Internal Blowout Preventer (Lower IBOP)
FunctionThe driller can remotely operate it hydraulically via the driller’s console, rotating the ball valve by 90° to quickly shut off the internal passage of the drill string, thereby preventing well kicks / blowouts

II. Technical Specifications

ParameterValue
Structure TypeFloating ball valve with metal‑to‑metal seal, equipped with a wave spring preloading and pressure‑assisted sealing mechanism
Inner Diameter197 mm
Rated Working Pressure105 MPa (15,000 psi)
Connection Thread6‑5/8 REG (REG thread, right‑hand (RH) rotation)
Operation MethodHydraulic remote control (via Driller’s Console) with emergency manual operation function
Operating Temperature Range-45°C ~ +55°C
Executive StandardAPI Spec 7‑1

III. Structural Composition

Mainly composed of:

  • Valve body

  • Upper / lower valve seats

  • Wave spring

  • Stainless steel valve core (ball)

  • Hydraulic drive yoke

  • Rotating shaft

  • O‑rings


IV. Differences from Lower Internal Blowout Preventer (Lower IBOP)

ComponentKey Features
Upper IBOPHydraulic remote control; installed at the lower end of the top drive main shaft; emergency quick shutdown
Lower IBOPManual operation with a wrench; installed below the Upper IBOP; serves as a backup safety valve

Contact Us

For technical inquiries, quantity quotes, or custom material configurations tailored to oil drilling industry needs, email: info@hyrig.com


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit