VICKERS 4CG-10-DF-21 Pilot Check Valve
Overview:
HYRIG can supply the VICKERS 4CG-10-DF-21 and related hydraulic components. This NG16 subplate-mounted pilot check valve includes a decompression feature to minimize pressure shocks during opening.
The D code indicates a decompression feature, which provides controlled decompression of large fluid volumes before the valve opens to allow full flow. F specifies a 1.05 MPa cracking pressure.
Confirm the D (decompression) feature and F (1.05 MPa) cracking pressure when replacing. Standard models without decompression omit the D code.
Used in high-flow VICKERS subplate-mounted systems. For related components, view VICKERS SystemStak Valves.
Need to confirm whether decompression (D) is required for your circuit? Contact HYRIG with your system parameters.
Used in high-flow hydraulic systems where controlled decompression is required before opening the check valve.
Disclaimer: VICKERS is a registered trademark of Eaton Corporation / Danfoss. HYRIG is an independent supplier of hydraulic components and is not affiliated with Eaton or Danfoss.
Specifications:
Contact Us:
For VICKERS 4CG-10-DF-21 selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.