VICKERS DGMFN-3 (NG6) Flow Control Valve Series
Overview:
HYRIG can supply the VICKERS DGMFN-3 series and related hydraulic components. These are SystemStak™ modular flow control valves designed for NG6 interfaces, providing precise speed control in both A and B lines.
| Parameter | Value |
|---|---|
| Mounting Standard | ISO 4401-03 (CETOP 3) |
| Mounting Bolt Pattern | 4 × M5 |
| Weight (approx.) | 0.9 kg |
X vs. Y: The X (meter-in) and Y (meter-out) codes are not interchangeable. Y is used for meter-out control (free flow towards actuator), X for meter-in (free flow away from actuator). Always verify the original valve's code before ordering.
Need to confirm the adjustment type (W = screw with locknut) or control range code? Contact HYRIG with your flow and pressure requirements.
Used for speed control of actuators in machine tools, presses, and injection molding machines where NG6 flow rates are sufficient.
Disclaimer: VICKERS is a registered trademark of Eaton Corporation / Danfoss. HYRIG is an independent supplier of hydraulic components and is not affiliated with Eaton or Danfoss.
Specifications:
Contact Us:
For VICKERS DGMFN-3 series selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.