XBSY is the product brand shown in the sand pump manual; HYRIG can supply the XBSY sand pump range and its spare parts. The XBSY sand pump (spraying pump) is a kind of equipment especially matched for mud pumps in oil drilling, used to flush and cool the sleeve and pistons during pump operation, and also for transporting mud in other situations.
| Type | Flow (m³/h) | Lift (m) | Efficiency (%) | Speed (r/min) | Shaft power (kW) | Motor power (kW) |
|---|---|---|---|---|---|---|
| 32SB180J-2.2kW | 7.5 | 10 | 48 | 1420/1750 | 0.55 | 2.2 |
| 32SB180J-4kW | 9 | 14 | 48 | 1750 | 0.93 | 3 (as listed; model designation includes 4kW; confirm at ordering) |
| 40SB180J-3kW | 15 | 10 | 53 | 1420/1750 | 0.78 | 4 (as listed; model designation includes 3kW; confirm at ordering) |
| 32PL | 7.5 | 10 | 48 | 1420 | 0.55 | Not listed in the technical data table |
| 32PL(B) | 7.5 | 10 | 48 | 1420 | 0.65 | Not listed in the technical data table |
Data source: Series Sand Pump (Spraying pump) Installation and Operation Instructions, Technical Data table.
The sand pump mainly consists of pump body, mechanically sealed pump cover, mechanical seal, impeller and pump base. Mechanical sealing is adopted to ensure operation without leakage. The pump has two drive types: motor direct drive and pulley drive.
According to the manual, the sand pump is especially matched for mud pumps in oil drilling. It flushes and cools the sleeve and pistons during pump operation, and can also be used in other situations for transporting mud.
For XBSY sand pump selection and spare parts, contact HYRIG: info@hyrig.com