YC315 Traveling Block | 315 Ton & 6 Sheaves
Overview:
HYRIG can supply the YC315 traveling block and its spare parts. The YC315 features a maximum load capacity of 3150 kN (315 tons), a 6-sheave design, and a sheave outer diameter of 1270 mm, designed for heavy-duty drilling operations.
| Model | Max Load (kN) | Sheaves | Sheave O.D. (mm) | Wire Line Dia. (mm) | Weight (kg) |
|---|---|---|---|---|---|
| YG225 | 2250 | 5 | 1120 | 32 | 3788 |
| YC315 | 3150 | 6 | 1270 | 35 | 5500 |
| YC450 | 4500 | 7 | 1524 | 38 | 8300 |
Data source: Technical data table.
| Dimension Item | Specification |
|---|---|
| Overall Dimension (L x W x H) | 2690 x 1350 x 800 mm |
| Weight | 5500 kg |
| Bearing Type | Roller bearing with centralized lubrication |
The traveling block uses a rugged steel frame and high-strength sheaves. It is suspended from the crown block via the drilling line and provides the mechanical advantage for hoisting. The sheave grooves are quenched for extended service life.
When replacing a traveling block, ensure the number of sheaves (6) matches the crown block (typically 7x6 stringing) and the drawworks. The 35 mm wire line diameter must be compatible with your existing drilling line.
Need to match a traveling block with your crown block? Tell us your line size and load capacity, and our engineers will assist. For lighter loads, view the YG225 Traveling Block.
Used in the hoisting system of drilling rigs to lift and lower the drill string.
Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.
We supply replacement parts including sheaves, bearings, and shafts. Please visit our Hoisting Equipment Parts page.
Specifications:
FAQ:
Contact Us:
For YC315 traveling block selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.