YUKEN DSG-03-2D2 Directional Valve
Overview:
HYRIG can supply the YUKEN DSG-03-2D2 and related hydraulic components. This NG10 directional valve uses a 2D2 spool, providing a 2-position, 4-way function with P connected to T and A/B blocked in the de-energized position.
The 2D2 spool provides a 2-position, 4-way function. In the de-energized position, P is connected to T and A/B are blocked. When energized, the spool shifts to connect P to A and B to T (or vice versa, depending on configuration).
Verify the spool type (2D2) and voltage code when replacing. The 50 series has unchanged installation dimensions.
Used in YUKEN NG10 directional valve stacks. For related components, view YUKEN DSG Directional Valves.
Need to confirm the voltage code or T-port rating for an NG10 application? Contact HYRIG with your system parameters.
Suitable for medium-to-high flow hydraulic systems requiring 2-position directional control with pump unloading in the de-energized position.
Disclaimer: YUKEN is a registered trademark of YUKEN KOGYO CO., LTD. HYRIG is an independent supplier of hydraulic components and is not affiliated with YUKEN KOGYO CO., LTD.
Specifications:
Contact Us:
For YUKEN DSG-03-2D2 selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.