YUKEN MBP/MBA/MBB/MBW Modular Relief Valves | 25 MPa

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the YUKEN MBP, MBA, MBB, and MBW modular relief valve series. These sandwich-mounted valves are used for pressure limitation in the P, A, or B lines of hydraulic circuits.
Conatct For Details
DetailReview(0)Additional

YUKEN MBP/MBA/MBB/MBW Modular Relief Valves

Overview:

HYRIG can supply the YUKEN MBP, MBA, MBB, and MBW series and related hydraulic components. These are modular relief valves designed for sandwich mounting between directional valves and manifold blocks.

Key Specifications & Model Comparison

Model CodeFunctionSizeMax PressureMax Flow
MBP-01P-line relief0125 MPa30 L/min
MBP-03P-line relief0325 MPa70 L/min
MBA-01Relief with back-pressure control0125 MPa30 L/min
MBA-03Relief with back-pressure control0325 MPa70 L/min
MBB-01Dual-purpose relief0125 MPa30 L/min
MBB-03Dual-purpose relief0325 MPa70 L/min
MBW-03A&B line relief0325 MPa120 L/min

Data source: YUKEN catalog and distributor listings.

For the specific 01-size P-line valve, view YUKEN MBP-01-H-30 Modular Relief Valve.

Dimensions (Text-Based)

ParameterSize 01Size 03
Mounting StandardISO 4401-03ISO 4401-05
Mounting Bolt Pattern4 × M54 × M6
Port ConnectionsP, T, A, BP, T, A, B

Cross-Reference & Replacement

When replacing a YUKEN modular valve, verify the mounting size (01 vs 03) and the pressure range code (e.g., H for 7–25 MPa). The sandwich footprint is standardized, but the pressure spring must match the system requirement.

Selection Support

Not sure whether you need MBP, MBA, or MBB? Tell us your circuit requirements (P, A, or B line relief), and our engineers will confirm the correct model code.

Applications

Used in hydraulic manifolds requiring compact pressure limitation in the P, A, or B lines, often between a directional valve and a manifold block.

Disclaimer: YUKEN is a registered trademark of YUKEN KOGYO CO., LTD. HYRIG is an independent supplier of hydraulic components and is not affiliated with YUKEN KOGYO CO., LTD.

Specifications:

  • Valve Type: Modular relief valve
  • Sizes: 01 (NG6), 03 (NG10)
  • Maximum Operating Pressure: 25 MPa (250 bar)
  • Mounting: Modular (sandwich plate)
  • Adjustment: Hand knob (standard)

Contact Us:

For YUKEN MBP/MBA/MBB/MBW selection, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit