YUKEN MSA Throttle Check Valve Series (A Line)
Overview:
HYRIG can supply the YUKEN MSA series and related hydraulic components. These sandwich valves provide throttle and check functions for the A service line, used when speed control is required in one direction only.
| Size | Max Pressure (MPa) | Max Flow (L/min) | Example Model (X) | Example Model (Y) |
|---|---|---|---|---|
| 01 (NG6) | 35 | 80 | MSA-01-X | MSA-01-Y |
| 03 (NG10) | 35 | 160 | MSA-03-X | MSA-03-Y |
| 06 (NG20) | 25 | 500 | MSA-06-X | MSA-06-Y |
| 10 (NG32) | 25 | 800 | MSA-10-X | MSA-10-Y |
Data source: YUKEN catalog and distributor listings.
For the NG10 meter-in variant, view YUKEN MSA-03-Y.
Confirm whether the original valve was an MSA (A line only) or an MSW (A & B lines). An MSA valve will not provide throttling for the B line.
Need speed control in only one direction? Tell us which line (A or B) and the required flow, and HYRIG will confirm the MSA model code.
Used in circuits where only one actuator direction requires speed control, saving cost and space compared to a dual-line valve.
Disclaimer: YUKEN is a registered trademark of YUKEN KOGYO CO., LTD. HYRIG is an independent supplier of hydraulic components and is not affiliated with YUKEN KOGYO CO., LTD.
Specifications:
Contact Us:
For YUKEN MSA series selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.